CRYSTORAMA 6623-CH-CL-MWP-CEILING Othello Three Light Ceiling Mount Instruction Manual

: June 12, 2024
: CRYSTORAMA

Table of Contents

CRYSTORAMA 6623-CH-CL-MWP-CEILING Othello Three Light Ceiling Mount
Product Information
Product Assembly Instructions
Hanging Instructions
Ceiling Installation Instructions
Parts List
ASSEMBLY INSTRUCTION MODEL #6623-CH-CL-MWP_CEILING
How to Install
Crystal Sets
Part Number
Read User Manual Online (PDF format)
Download This Manual (PDF format)

CRYSTORAMA 6623-CH-CL-MWP-CEILING Othello Three Light Ceiling Mount

Product Information

The product is a ceiling light fixture with model number 6623-CH-CL- MWP_CEILING. It requires 3 candelabra base bulbs with a maximum wattage of 60W. The use of LED bulbs is recommended for extended use. The fixture is damp-rated and can be hung or installed on the ceiling.

Product Assembly Instructions

WARNING: All electrical components must be
installed by a licensed electrician in accordance with the National
Electric Code and the appropriate local electrical codes. Turn off
the power before installing.

Hanging Instructions

Place the shade over the frame and then place the top assembly over the shade.
Ensure that the slot in the top assembly is aligned with the shade spoken.
Secure the shade with the loop.
Install the bobeches, and bulbs, and connect the power.
Dress the fixture starting with the packet labeled (A).
Apply crystal sets in alphabetical order.

Ceiling Installation Instructions

Place the shade over the frame and then place Canopy 2 over the
shade.
Ensure that the slot in Canopy 2 is aligned with the shade
spoke.
Secure the shade with a hex nut.
Attach the fixture safely into the outlet box.
Install the bobeches, and bulbs, and connect the power.
Dress the fixture starting with the packet labeled (A).
Apply crystal sets in alphabetical order.

Parts List

(3)-Wire Connector
(1)-Mounting Plate
(1)-Ground Screw
(1)-Nipple
(2)-Outlet Box Screws
(1)-Canopy 1 (W5.1xH1) XEH6623CHCAN5IN
(1)-Collar Loop
(1)-Collar Ring
(1)-Chain;72,4mm XEH6623CHCHA4MM
(1)-Top Assembly
(1)-Frame
(1)-Fabric Shade (W14xH6.5) XEH6623SHA14IN
(3)-Bobeche (D3.9 x Hole:1) XEH6623BOB4IN
(3)-Metal Sleeve (H2.75)XEH6623CHMCDL2.75IN
(3)-Plastic Sleeve (H2.75) XEH6623PCDL2.75IN
(1)-Canopy 2(W4.25xH1) XEH6623CHCAN4.25IN
(2)-Ball Nuts XEH6623CHBANUT
(2)-Screws
(3)-Wire Connector

ASSEMBLY INSTRUCTION MODEL #6623-CH-CL-MWP_CEILING

CRYSTORAMA-6623-CH-CL-MWP-CEILING-Othello-Three-Light-Ceiling-Mount-
fig-3

WARNING

All electrical components must be installed by a licensed electrician in accordance with the National Electric Code and the appropriate local electrical codes.
You will need 3-Candelabra Base Bulb40Watts Recommended 60 Watts Max.
USE LED BULBS FOR EXTENDED USE
The fixture is damp rated

How to Install

For hanging

Place the shade over the frame then place the top assembly over the shade. Make sure the slot in the top assembly is aligned with the shade spoken. Secure the shade with the loop.

For ceiling

Place the shade over the frame then place the canopy 2 over the shade. Make sure the slot in canopy 2 is aligned with the shade spoken. Secure the shade with a hex nut.
After safely attaching the fixture to the outlet box, install bobeches, and bulbs and proceed to connect the power.
When you begin to dress the fixture, start with a packet labeled (A)
IMPORTANT: Apply crystal sets in alphabetical order.

Crystal Sets

CRYSTORAMA-6623-CH-CL-MWP-CEILING-Othello-Three-Light-Ceiling-Mount-
fig-5

A. (14mm+50mm)x9sets
B. (Square+50mm)x6sets
C. (14mmx6Pcs)x6sets
D. (14mmx11Pcs+30mm Ball)x1set

WARNING: This product can expose you to lead which is known to the State of California to cause cancer and or birth defects or reproductive harm For more information go to www.P65W.arnings.ca.gov.