CRYSTORAMA 4810-WW Southport Five Light Ceiling Mount Instruction Manual
- June 12, 2024
- CRYSTORAMA
Table of Contents
CRYSTORAMA 4810-WW Southport Five Light Ceiling Mount
Product Information
The model #4810-WW is a Damp rated lighting fixture that requires 5 Medium Base Bulbs with 40 Watts recommended and 60 Watts Max. It is recommended to use LED bulbs for extended use. The fixture comes with a Center metal flower stem with thread finial, 5 arms, 5 metal covers, 5 socket cups, 5 glass shades, 5 socket rings, and a socket collar tool. The fixture measures W5xH1 1/8 inches and comes with a mounting bar, screw, and canopy. This product can expose you to Lead, which is known to the State of California to cause cancer and/or birth defects or reproductive harm.
Product Usage Instructions
Before installation, ensure that all electrical components are installed by a licensed electrician in accordance with the National Electric Code and the appropriate local electrical codes. For installation, place the fixture parts on a soft cloth-covered platform.
- Screw the Center metal flower stem onto the Center column kit.
- Place each glass shade over a socket. Secure down with a socket ring and tighten each socket using the socket collar tool.
- Attach the mounting bar onto the outlet box.
- Raise the fixture up and do the wire connection.
- Attach the canopy over the mounting bar and secure with Finial balls.
Note: Turn off power before installation. Use LED bulbs for extended use. This product can expose you to Lead, which is known to the State of California to cause cancer and/or birth defects or reproductive harm. For more information visit www.p65warnings.ca.gov
WARNING
- Electrical Danger
- Turn Power Off
All electrical components must be installed by a licensed electrician in accordance with the National Electric Code and the appropriate local electrical codes.
You will need
- You will need 5 Medium Base Bulb
- 40 Watts recommended 60 Watts Max.
- USE LED BULBS FOR EXTENDED USE
- The fixture is Damp rated
HOW TO INSTALL
Place the fixture parts on a soft cloth-covered platform before installation of fixture.
- Screw the Center metal flower stem onto the Center column kit.
- Place each glass shade over a socket. Secure down with a socket ring and tighten each socket using the socket collar tool.
- Attach the mounting bar onto the outlet box.
- Raise the fixture up and do the wire connection. Attach the canopy over the mounting bar and secure with Finial balls.
Part Numbers
- A. (2)-Wire connector
- B. (1)-Mounting bar
- C. (2)-Screw
- D. (1)-Canopy (W5″xH1 1/8″)-XSN4810WWCAN5IN
- E. (2)-Finial ball
- A. (2)-Wire connector
- F. (1)-Center Column Kit
- Rod ; H2″.
- 3″Plate with 6 leafs.
- Distributor Box ; Ø3 ” ; 10.3mm center hole.
- Side Metal flower stem x5.
- Bottom metal flower stem x5.
- G. (1)-Center metal flower stem with thread finial
- H. (5)-7″Arms
- I. (5)-Metal cover
- J. (5)-Socket cup
- K. (5)-Glass shade ; W5″,H3 1/2″-XSN4800GLA5IN
- L. (5)-Socket ring
- M. (1)-Socket collar tool
WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer and/or birth defects or reproductive harm. For more information go to www.p65warnings.ca.gov
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>