CRYSTORAMA DAN-400-PN Danielson Three Light Ceiling Mount Instruction Manual
- June 12, 2024
- CRYSTORAMA
Table of Contents
CRYSTORAMA DAN-400-PN Danielson Three Light Ceiling Mount
Overview
Dimension
HOW TO REPLACE THE BULB:
PLEASE TAKE THE LOWER FRAME OFF THE UPPER FRAME TO CHANGE THE BULB.
Safety Instruction
|
---|---
All electrical components must be installed by a licensed electrician in
accordance with the National Electric Code and the appropriate local
electrical codes.| You will need 3-Medium Base Bulb
40 Watts Frosted bulb Recommended
60 Watts Max.
USE LED BULBS FOR EXTENDED USE This fixture is Dry rated.
How To Install
-
Install the mounting screws into the matching holes in the mounting bar.
Secure the mounting bar to the outlet box with the outlet box screws. -
Raise ceiling pan and upper frame allowing the mounting screws to protrude through the holes in the ceiling pan, and secure with the ball nut.
-
Install the bulbs(not included) into the socket.
-
Slide the glass diffuser into the bottom of the lower frame.
-
Slide the fabric shade inside the lower frame and secure it with clips.
-
Raise the lower frame up and hang it onto the ring on the bottom of the upper frame.
NOTE: HIDE THE SEAMS OF THE SHADE BY ALIGNING IT WITH A VERTICAL METAL BAR.
WARNING:
This product can expose you to Lead which is known to the state of California
to cause cancer and/or birth defects or reproductive harm.
For more information go to:
www.P65Warnings.ca.gov
Part Number
- A. (1)-Mounting hardware
- B. (1)-Ceiling pan W5’’xH1’’
- C. (2)-Ball nut #XRF400PNBANUT
- D. (1)-Upper frame
- E. (1)-Fabric shade W16-1/4’’XH6-1/2’’ #XRF400SHA16.25IN
- F. (1)-Glass diffuser #XRF400DIF16.375IN
- G. (1)-Lower frame
CUSTOMER SUPPORT
Scan Me
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>