CRYSTORAMA 8101-AG Paxton One Light Wall Mount Instruction Manual
- June 12, 2024
- CRYSTORAMA
Table of Contents
CRYSTORAMA 8101-AG Paxton One Light Wall Mount
Product Information
The product is a wall-mounted light fixture with model number #8101-AG. It comes with mounting hardware including a mounting plate, mounting screws, wire nut, and screws. The fixture also includes a back plate, crystal drop, crystal column, and shade. The product requires a candelabra bulb with a maximum wattage of 60 watts (bulb not included).
It is important to note that all electrical components must be installed by a licensed electrician in accordance with the National Electric Code and appropriate local electrical codes. The product may also expose users to lead, which is known to the State of California to cause cancer and/or birth defects or reproductive harm.
Product Usage Instructions
- Attach the fixture onto the outlet box in the wall.
- Put the shade on the candle sleeve and secure it in place using the socket ring.
- Install the recommended bulb into the socket and screw the crystal drop into the bottom.
- After connecting the wires, fix the back plate on the mounting plate with screws.
It is recommended to use LED bulbs for extended use of the product.
ASSEMBLY INSTRUCTION MODEL #8101-AG
WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer and/or birth defects or reproductive harm. For more information go to www.P65Warnings.ca.gov
All electrical components must be installed by a licensed electrician in accordance with the National Electric Code and the appropriate local electrical codes.
You will need 2-Candelabra Bulb 60 watts Max Bulb not included USE LED BULBS FOR EXTENDED USE This fixture is DRY rated
How to Install
- Attach the fixture onto the outlet box in the wall.
- Put the shade on the candle sleeve and secure it in place using the socket ring.
- Install the recommended bulb into the socket and screw the crystal drop into the bottom.
- After connecting the wires, fix the back plate on the mounting plate with screws.
Part Numbers
- A. Mounting Hardware
- Mounting Plate
- Mounting Screws
- Wire Nut
- Screws
- B.(1)Back plate;4.5″x6″x0.63″h;XMO8101PNBKP6IN
- C.(2)Crystal drop
- D.(2)Crystal Column
- E.(2)Candle Sleeve
- F.(2)Shade;Ø5″x5.8″h;XMO8101SHA6IN