CRYSTORAMA 8102-PN Two Light Wall Mount Instruction Manual

CRYSTORAMA 8102-PN Two Light Wall Mount

Product Information

• Model Number: 8102-PN
• Brand: Crystorama
• Product Dimensions: 4.5 x 7.5 x 18.4 inches
• Item Weight: 3 pounds
• Style: Traditional
• Material: Metal, Crystal
• Color: Polished Nickel
• Power Source: Hardwired
• Voltage: 120 volts
• Wattage: 60 watts per bulb (Candelabra Bulb)
• Number of Lights: 2
• Bulb Type: LED recommended for extended use (not included)
• Usage: Indoor use only
• Certification: UL Listed
• Warning: This product contains Lead which is known to the State of California to cause cancer and/or birth defects or reproductive harm. For more information visit www.P65Warnings.ca.gov

Product Usage Instructions

1. All electrical components must be installed by a licensed electrician in accordance with the National Electric Code and the appropriate local electrical codes.
2. Attach the fixture onto the outlet box in the wall.
3. Put the shade on the candle sleeve and secure it in place using the socket ring.
4. Install the recommended bulb into the socket and screw the crystal drop into the bottom.
5. After connecting the wires, fix the back plate on the mounting plate with screws.
6. Use 2-Candelabra Bulbs with a maximum wattage of 60 watts per bulb. LED bulbs are recommended for extended use but not included.
7. This product is for indoor use only.

ASSEMBLY INSTRUCTION MODEL #8102-PN

WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer and/or birth defects or reproductive harm. For more information go to www.P65Warnings.ca.gov

All electrical components must be installed by a licensed electrician in accordance with the National Electric Code and the appropriate local electrical codes.

You will need 2-Candelabra Bulb 60 watts Max Bulb not included USE LED BULBS FOR EXTENDED USE This fixture is DRY rated

How to Install

1. Attach the fixture onto the outlet box in the wall.
2. Put the shade on the candle sleeve and secure it in place using the socket ring.
3. Install the recommended bulb into the socket and screw the crystal drop into the bottom.
4. After connecting the wires, fix the back plate on the mounting plate with screws.

Part Numbers

• A. Mounting Hardware
  1. Mounting Plate
  2. Mounting Screws
  3. Wire Nut
  4. Screws
• B.(1)Back plate;4.5″x6″x0.63″h;XMO8101PNBKP6IN
• C.(2)Crystal drop
• D.(2)Crystal Column
• E.(2)Candle Sleeve
• F.(2)Shade;Ø5″x5.8″h;XMO8101SHA6IN

References

• Crystorama Lighting
• P65Warnings.ca.gov

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>