CRYSTORAMA 9507SN Luxo Five Light Ceiling Mount Instruction Manual
- June 12, 2024
- CRYSTORAMA
Table of Contents
CRYSTORAMA 9507SN Luxo Five Light Ceiling Mount
Product Information
The CRYST@RAMA Lighting Model #9507SN_CEILING is a dry-rated ceiling fixture that has been providing lighting solutions for sixty years. It has a swivel ball, poly plate, and canopy that are included in the package along with two hang rods, ball nuts, and a mounting plate. The fixture is designed to accommodate five medium bulbs with a recommended wattage of 60 watts each. LED bulbs are recommended for extended use. The product is listed and rated for dry use only. However, it is important to note that all electrical components must be installed by a licensed electrician in accordance with the National Electric Code and the appropriate local electrical codes to avoid any electrical danger. The product can also expose you to Lead, which is known to the state of California to cause cancer and/or birth defects or reproductive harm.
Product Usage Instructions
- Select the correct number of hang rods A and B, depending on the desired hanging height. Pass the wire through the rods and screw them together.
- Slide the poly plate, swivel ball, and canopy over the rod assembly. Screw one end of the rod assembly onto the fixture frame and the other end onto the swivel ball.
- Screw the threaded pipe onto the bottom of the fixture frame. Place the pipe cover and end cap over the threaded nipple and secure with the nut.
- Install the mounting plate onto the outlet box. Raise the fixture up to the ceiling and do the wire connection. Raise the poly plate and canopy up along the rod and secure with ball nuts. Please make sure the nipple on the center hole of the canopy leans against the slot on the swivel ball.
- Install the bulb (not included) into the socket.
- Place the bottom shade and poly disc over the threaded pipe and secure with the final. Please make sure that the spokes on the bottom shade line up with the ones on the top shade when tightening the finial.
Please follow these instructions carefully to ensure proper installation and avoid any safety hazards. For more information on safety precautions, refer to the user manual or contact a licensed electrician.
ASSEMBLY INSTRUCTION
-
All electrical components must be installed by a licensed electrician in accordance with the National Electric Code and the appropriate local electrical codes.
-
You will need 5- Med. Bulb 60 Watts Recommended
-
USE LED BULBS FOR EXTENDED USE THE FIXTURE IS DRY RATED
How to install
- Select the correct number of hang rods A and B, depending on the desired hanging height. Pass the wire through the rods and screw them together.
- Slide the poly plate, swivel ball and canopy over the rod assembly .Screw one end of the rod assembly onto the fixture frame and the other end onto the swivel ball.
- Screw the threaded pipe onto the bottom of the fixture frame. Place the pipe cover and end cap over the threaded nipple and secure with the nut.
- Install the mounting plate onto the outlet box. Raise the fixture up to the ceiling and do the wire connection. Raise the poly plate and canopy up along the rod and secure with ball nuts. Please make sure the nipple on the center hole of canopy leans against the slot on the swivel ball.
- Install the bulb(not included) into the socket .
- Place bottom shade and poly disc over the threaded pipe and secure with the final. Please make sure that the spokes on the bottom shade line up with the ones on the top shade when tightening the finial.
Part Number
- A. (1)-Swivel Ball
- B. (1)-Canopy W6″xH0.8″(XSU9507SNCAN6IN)
- C. ( 1)-Poly Plate
- D. (2)-Ball Nut
- E. (2)-Hang Rods A 12″ (XSU9507SNROD12IN)
- F. (1)-Hang Rods Ba· (XSU9507SNROD8IN)
- G. (1)-Fixture frame
- H. (1)-Upper Shade w2&•xH7·(XSU9507SNSHA26IN)
- I. (4)-BALL Nut
- J. (1)-Threaded Pipe
- K. (1)-Metal Pipe Cover
- L. (1)-Bottom Shade W19•xH3•(XSU9507SNSHA19IN)
- M. (1)-End cap
- N. (1)-Nut
- O. (1)-Poly Disc
- P. (1)-Flnlal w1.14•xH2.S&·(XSU9505SNFIN)
- Q. (5)- Bulb(Not Included)
- R. (2)- Machine Saews
WARNING: This product can expose you to Lead which is known to the state of California to cause cancer and/or birth defects or reproductive harm. For more information go to www.P65Warnings.ca.gov
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>