CRYSTORAMA KEN-8305-VG Kendal Four Light Ceiling Mount Instruction Manual
- June 12, 2024
- CRYSTORAMA
Table of Contents
CRYSTORAMA KEN-8305-VG Kendal Four Light Ceiling Mount
Product Information: Crystorama KEN-8305-VG
The Crystorama KEN-8305-VG is a damp-rated lighting fixture that has been providing illumination for sixty years. It includes mounting hardware, ball nut, ceiling pan, sockets, screws, top metal ring, glass panels, glass diffuser, hooks, and metal frame. The product is compatible with 4 medium base bulbs of up to 60 Watts each. LED bulbs are recommended for extended use. The fixture is made of high-quality materials and is designed to provide a long- lasting lighting solution.
Product Usage Instructions
- Turn off the power and ensure all electrical components are installed by a licensed electrician in accordance with the National Electric Code and the appropriate local electrical codes.
- Slide the glass diffuser onto the bottom of the metal frame and secure it with clips.
- Slide the glass panels inside the metal frame and secure them with clips.
- Remove screw#2 from each of the hooks. Place one hook onto the bottom of the bracket on the metal frame by inserting screw#1 into the 1st hole on the bracket. While holding the hook in place, place the top metal ring over the top of the bracket by aligning the hole on it with the 2nd hole on the bracket and hook. Secure it with screw#2. Repeat this for other hooks.
- Install the mounting screws into the matching holes in the mounting plate. Secure the mounting plate to the outlet box with the outlet box screws.
- Raise ceiling pan allowing the mounting screws to protrude through the holes in the ceiling pan and secure with the ball nut.
- Install the bulb (not included) into the socket.
- Place the metal frame over the ceiling pan by inserting the hooks into the holes of the metal tab on the ceiling pan.
To change the bulb, raise the metal frame up over the ceiling pan and turn it sideways to take it down. Install the new bulb and put the metal frame back.
Note: This product can expose you to Lead which is known to the state of California to cause cancer and/or birth defects or reproductive harm. For more information go to www.P65Warnings.ca.gov
ASSEMBLY INSTRUCTION
MODEL#KEN-8305-VG
WARNING:
All electrical components must be installed by a licensed electrician in
accordance with the National Electric Code and the appropriate local
electrical codes. You will need 4-Medium Base Bulb 40 Watts Frosted bulb
Recommended 60 Watts Max. USE LED BULBS FOR EXTENDED USE This fixture is Damp
rated
How to install
- Slide the glass diffuser onto the bottom of metal frame and secure it with clips.
- Slide the glass panels inside the metal frame and secure it with clips.
- Remove screw#2 from each of the hooks. Place one hook onto the bottom of the bracket on the metal frame by inserting screw#1 into the 1st hole on the bracket. While holding the hook in place, place the top metal ring over the top of the bracket by aligning the hole on it with the 2nd hole on the bracket and hook. Secure it with screw#2. Repeat this for other hooks.
- Install the mounting screws into the matching holes in the mounting plate. Secure the mounting plate to the outlet box with the outlet box screws.
- Raise ceiling pan allowing the mounting screws to protrude through the holes in the ceiling pan, and secure with the ball nut.
- Install the bulb(not included) into the socket.
- Place the metal frame over the ceiling pan by inserting the hooks into the holes of the metal tab on the ceiling pan.
How to change the bulb:
Raise the metal frame up over the ceiling pan and turn it sideway to take it
down. Install the new bulb and put the metal frame back.
WARNING:
This product can expose you to Lead which is known to the state of
California to cause cancer and/or birth defects or reproductive harm. For more
information go to www.P65Warnings.ca.gov
Part Number
- (1)-Mounting hardware
- (2)-Ball nut #XRF8305VGBANUT
- (1)-Ceiling pan
- (4)-Socket
- (4)-Screw
- (1)-Top metal ring
- (4)-Glass panel L15-1/4’’xW3-7/8’’xH3-1/8’’ #XRF8304GLA15.25IN
- (1)-Glass diffuser W20-5/8’’ #XRF8304DIFF20.625IN
- (4)-Hook
- (1)-Metal frame
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>