Precision Medical Live Active Five Sieve Bed Instruction Manual
- June 12, 2024
- Precision Medical
Table of Contents
Precision Medical Live Active Five Sieve Bed
Product Information
The Sieve Bed Assembly is a replacement part for the concentrator.
It is designed to remove nitrogen from ambient air and provide oxygen-enriched
air to the user. The assembly contains a sieve bed that separates oxygen
molecules from the nitrogen molecules in the air.
Product Usage Instructions
- Turn off the concentrator and remove the battery and external power from the unit.
- Turn the unit upside down and place it on a soft surface. Remove screws and bottom cover.
- Pull upward on the Pull String Loop while holding the device down to remove the sieve bed assembly.
- Remove 4 plugs from the new sieve bed assembly and slide it into the concentrator.
- Gently push until sieve bed replacement is fully seated, flush with bottom surface. Replace bottom cover and secure screws.
- Turn the unit upright and insert the battery. Gently push until the battery is locked in place.
Sieve Bed Assembly Registration
To register the Sieve Bed Assembly in the Concentrator, follow these steps:
- Press and hold the Audio Pause button to enter the menu.
- Press the 5 button to navigate to the Sieve Beds option.
- Press the 3 button to select the Sieve Beds option.
- Press the 3 button again to register the sieve bed assembly. “Done” will appear on the screen once completed.
- Press the Audio Pause button to exit the menu.
Precision Medical Limited Warranty
Precision Medical, Inc. (PMI) warrants the Sieve Bed Assembly (“Replacement
Part”) is free from defects and in materials and workmanship under normal and
proper use and when correctly maintained in accordance with the applicable
instructions, for the following period:
Sieve Bed Assembly 1 Year
All warranties begin as of date of shipment of the replacement part by PMI to
the original purchaser.
For warranty claims:
- Replacement part provided by or purchased from DME – contact DME;
- Replacement part purchased directly from PMI – contact PMI
No warranty is made with respect to normal wear and tear or damage due to
neglect, misuse, accident, physical damage, or alteration of the replacement
part.
Failure to operate the replacement part in accordance with PMI’s User
Instructions shall void this Limited Warranty.
Upon receipt of the replacement part, Purchaser shall fully inspect each item.
Any claim must be made in writing by contacting PMI Customer Service within
the warranty period following the discovery of a purported defect and/or the
oxygen purity is below 87%. If necessary, PMI will issue a Return Goods
Authorization (RGA). Replacement part(s) returned without an RGA may be
refused and returned at Purchaser’s expense.
The sole remedy for any such defect in the replacement part shall be a
replacement as determined by PMI.
Representatives of PMI or any retailers are not authorized to make oral
warranties about the merchandise described in this contract, and any such
statements shall not be relied upon and are not part of the contract for sale.
Thus, this writing is a final, complete and exclusive statement of the terms
of this contract.
This warranty is exclusive and is in lieu of any warranty of merchantability,
fitness for a particular purpose or other warranty of quality, whether express
or implied.
PMI shall not under any circumstances be liable for special, incidental or
consequential damages including but not limited to lost profits, lost sales,
or injury to person or property. Correction of non-conformities as provided
above shall constitute fulfillment of all liabilities of PMI whether based on
contract, negligence, strict tort or otherwise. PMI reserves the right to
discontinue manufacture of any product or change product materials, designs,
or specifications without notice.
Any additional action to enforce any provision of this Limited Warranty may be
commenced only in the state or federal courts of Pennsylvania and exclusive
jurisdiction of the Commonwealth of Pennsylvania.
PMI reserves the right to correct clerical or typographical errors without
penalty.
This warranty is not transferable. Retain original receipt for valid proof of
purchase.
For warranty or repair service contact PMI customer service at
warranty@precisionmedical.com
This device may contain substances that could be harmful to the environment
and must be disposed of properly. Follow local governing ordinances and
recycling plans regarding disposal.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>