eufy T8441J11 Outdoor Cam Pro / Outdoor Cam User Guide
- June 6, 2024
- Eufy
Table of Contents
eufy T8441J11 Outdoor Cam Pro / Outdoor Cam
Product Overview
Outdoor Cam Pro / Outdoor Cam
-
Spotlight
-
Lens
-
Status LED
-
Microphon
-
Micro USB port
• Connect to a USB charge -
SYNC button
-
microSD card slot
• Insert a microSD card to store recordings
Powering On the Device
Connect the micro USB connector to the Outdoor Cam Pro / Outdoor Cam’s micro USB port and the other end to a power adapter. Then plug the power adapter into a power outlet. Wait until the camera status LED turns solid blue.
Setting up the System
Download the eufy Security app from the App Store (iOS devices) or Google Play (Android devices). Create an account and tap “Add Device” to add Outdoor Cam Pro / Outdoor Cam to your device list. Follow the on-screen instructions to complete the setup.
| 
---|---
Mounting the Camera
A. Place the camera on a table
Attach the bottom of your camera to the magnetic base and place it on the
table.
B. Mount the camera onto a wall
Note
Before mounting the camera:
- Unplug the USB cable from the power adapter.
- Find a spot where the camera can easily reach a power outlet.
- Make sure the camera receives a strong Wi-Fi connection in the spot you want to mount it so that it can stream video to your eufy Security app.
- A 3M adhesive strip is provided for people who don’t want to drill holes in the wall. Adhere the metallic plate with the 3M adhesive strip after fastening the charging cable under the metallic plate’s hook.
-
Drill a pilot hole using a power drill. Install the metallic plate using the provided anchors (optional) and screws. Anchors are needed for walls that are made of brick or concrete. Make sure there is enough space for the charging cable to run through before you fix the screws.
-
Attach the magnetic base to the metallic plate. Attach the Outdoor Cam Pro / Outdoor Cam onto the magnetic base.
-
Rotate the camera to adjust the view and check it using the live stream which you can access in the eufy Security app.
Tip: For more details, check the online manual: https://www.eufylife.com/support
Notice
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures: (1) Reorient or
relocate the receiving antenna. (2) Increase the separation between the
equipment and receiver. (3) Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected. (4) Consult the dealer
or an experienced radio/ TV technician for help.
FCC Radio Frequency Exposure Statement
The device has been evaluated to meet general RF exposure requirements. The device can be used in fixed/mobile exposure condition. The min separation distance is 20cm. Notice: Shielded cables All connections to other computing devices must be made using shielded cables to maintain compliance with FCC regulations.
The following importer is the responsible party
Company Name: POWER MOBILE LIFE, LLC
Address: 400 108th Ave NE Ste 400, Bellevue, WA 98004-5541
Telephone:1-800-988-7973
This product complies with the radio interference requirements of the European Community.
Declaration of Conformity
Hereby, Anker Innovations Limited declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU.For the declaration of conformity, visit the Web site: https://www.eufylife.com/.
This product can be used across EU member states. The adapter shall be installed near the equipment and shall be easily accessible. Do not use the Device in the environment at too high or too low temperature, never expose the Device under strong sunshine or too wet environment. The suitable temperature for T8441 and accessories is 0°C-40°C.
When charging, please place the device in an environment that has a normal
room temperature and good ventilation. It is recommended to charge the device
in an environment with a temperature that ranges from 5°C~25°C.
Please ensure to use only the charger offered by the manufacturer. Using
unauthorized charger may cause danger and violate the authorization of the
device and the guarantee article.
This charger is for indoor use only. The charger type is TEKA-UCA10EU, output voltage/current is 5Vdc/1A. The plug considered as disconnect device of adapter.
RF exposure information: The Maximum Permissible Exposure (MPE) level has been calculated based on a distance of d=20 cm between the device and the human body. To maintain compliance with RF exposure requirement, use product that maintain a 20cm distance between the device and human body.
CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS
Wi-Fi Operating Frequency Range:2412~2462MHz ; Wi-Fi Max Output Power:
23.90dBm
Bluetooth Operating Frequency Range: 2402~2480MHz; Bluetooth Max Output Power:
7.224dBm Anker Innovations Deutschland GmbH I Georg-Muche-Strasse 3, 80807
Munich, Germany
Anker Technology (UK) Ltd I Suite B, Fairgate House, 205 Kings Road, Tyseley,
Birmingham, B11 2AA, United Kingdom
This product is designed and manufactured with high quality materials and components, which can be recycled and reused.
This symbol means the product must not be discarded as household waste, and should be delivered to an appropriate collection facility for recycling. Proper disposal and recycling helps protect natural resources, human health and the environment. For more information on disposal and recycling of this product, contact your local municipality, disposal service, or the shop where you bought this product.
IC Statement
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may
cause undesired operation of the device.
IC RF Statement:
When using the product, maintain a distance of 20cm from the body to ensure compliance with RF exposure requirements. Lors de l’utilisation du produit, maintenez une distance de 20 cm du corps afin de vous conformer aux exigences en matière d’exposition RF.
Customer Service
-
Warranty
12-month Limited Warranty -
Call Us
United States +1 (800) 988 7973 Mon-Fri 9AM-5PM (PT) United Kingdom +44 (0) 1604 936 200 Mon-Fri 6AM-11AM (GMT)
Germany +49 (0) 69 9579 7960 Mon-Fri 6:00-11:0 -
Email Us
Customer Support: support@eufylife.com
EufyOfficial
EufyOfficial
EufyOfficial
Anker Innovations Limited
Room 1318-19,Hollywood Plaza,610 Nathan
Road,Mongkok,Kowloon,Hong Kong
Anker Innovations Limited. All rights reserved. eufy Security and eufy Security Logo are trademarks of Anker Innovations Limited, registered in the United States and other countries. All other trademarks are the property of their respective owners.
Documents / Resources
| eufy
T8441J11 Outdoor Cam Pro / Outdoor
Cam
[pdf] User Guide
T8441X, 2AOKB-T8441X, 2AOKBT8441X, T8441J11, Outdoor Cam Pro, Outdoor Cam
---|---