TESLA MP80 Multifunctional USB Hub User Manual
- June 4, 2024
- Tesla
Table of Contents
TESLA DEVICE MP80
User Manual
MP80 Multifunctional USB Hub
System Requirements
- Computer with USB-C™ port that supports USB DisplayPort Alternate Mode
- HDMI monitor
- Ethernet network with speeds up to 10/100/1000 Mbps
Product Feature
USB C adapter (TYPE C to HDMI+3USB3.0 ports+PD). It is suitable for PC, MacBooks, mobile phones, digital cameras, video cameras,s, and other products with the popular type-C interface. The output of HDMI is suitable for projectors, display screens, TV, and other devices. It can support up to 4K (38402160 @30Hz) Resolution output; extended USB3.0 can connect a USB mouse, keyboard, USB flash disk, mobile hard disk, card reader, and other digital products to read and write data, and the transmission rate can reach 5Gbps and can provide 5V/0.9A power supply for external electronic equipment; PD3.0 charging protocol (60W; 20V/3A), and supports the function of 10/100/1000m network card, plug, and play.
Product Overview
- USB-C Connector with Built-In Cable
- USB-A 3.0 Ports
- 4K HDMI port
- RJ45 Ethernet Network Port
- USB-C port for PD charging
Installation
Notes:
- When connected to an AC power source by way of the USB-C charging port, 5W is dedicated to the docking station and connected to USB peripherals. The remaining power is used to charge the connected USB-C device.
- When the unit is connected to the USB-C port on your computer and to a network via Cat5e/6 cabling, a network connection will automatically be established. If no connection is made, one can be established manually by going to your computer’s network settings page. For example, when using a Mac, navigate to the Network section found in System Preferences, click the ‘Assist Me’ button to get to the Network Setup Assistant, then follow the prompts to establish a connection.
- Connect the built-in USB-C cable to the USB-C port on your laptop, tablet or another device.
- Use an HDMI cable to connect a monitor or display to the unit’s HDMI port.
- Connect USB peripherals to the unit’s USB-A 3.0 hub ports.
- For an Ethernet connection, use the Cat5e/6 UTP cable to connect to the unit’s RJ45 port.
- Charge a device by connecting a USB-C charger to the unit’s USB-C port. The USB-C port can also be used to connect a USB-C peripheral device.
Specifications
Input Connectors
USB| 1x USB-C (Male)
Output Connectors
USB-A| 2x USB-A (Female)
USB-C| 1x USB-C for PD (Female)
HDMI| 1x HDMI (Female)
Ethernet| 1x RJ45
Environmental
Operating Temperature| 32° to 131°F (0° to 55°C)
Operating Humidity| 10% to 85% RH, Non-Condensing
Storage Temperature| 14° to 158°F (-10° to 70°C)
Storage Humidity| 5% to 90% RH, Non-Condensing
Power Requirements
USB-C Charging Port| Supports up to 20V 3A (60W)
Prohášení o shodě
a info o výrobku naleznete zde:
https://eshop.tesla-electronics.eu/tesla-device-mp80-multifunkcni-usb-hub-
5v1/ 
www
.tesla-electronics.eu
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>