RIVER OF GOODS 20637 Hadley 8 Inch 1-Light Gold Pendant with Green Glass Shade Instruction Manual
- June 12, 2024
- River OF GOODS
Table of Contents
RIVER OF GOODS 20637 Hadley 8 Inch 1-Light Gold Pendant with Green Glass
Shade
Product Information
The product is a lamp that comes with a mounting bracket, canopy, lamp shade, socket ring, and bulb. The lamp is designed for indoor use only and has a maximum wattage limit, which is indicated on a caution label near the lamp holder. The lamp can be assembled using the provided screws and wire nuts. The lamp shade can be attached to the lamp holder, which is pre-assembled with a socket ring. The bulb is not included and can be chosen from two options, E26 Type A 40W X 1 or E26 CFL 13W X 1.
Product Usage Instructions
- Refer to the wattage caution label near the lamp holder to determine the maximum wattage limit and ensure that the bulb(s) do not exceed it.
- Ensure that the lamp is unplugged from the wall receptacle before assembling it.
- Attach the mounting bracket(C) to the outlet box using two mounting screws(E).
- Pull out the outlet wires and housing grounding wire from the outlet box and connect them using wire nuts (B):
- Connect the WHITE wire with WHITE-NEUTRAL.
- Connect the BLACK wire with BLACK-LIVE.
- Attach the fixture grounding wire to the mounting bracket with green grounding screw(A).
- Carefully tuck the wires back into the outlet box.
- Secure the canopy to the metal mounting bracket (C) with screws provided (D).
- Attach the lamp shade to the lamp holder(F) and secure it with socket ring(G). Note that the socket ring comes pre-assembled and is located on the socket.
- Install the bulb H (not included) by selecting either E26 Type A 40W X 1 or E26 CFL 13W X 1.
- After assembling the lamp, plug it into a wall receptacle and enjoy its illumination.
IMPORTANT SAFETY INSTRUCTIONS
CAUTION – Refer to the wattage caution label located near the lamp holder
for maximum wattage – do not exceed the maximum wattage.
WARNING – Do not attempt to replace the bulb(s) while the lamp is plugged
into a wall receptacle
CARE INSTRUCTIONS – Use only a soft cloth; do not use any chemicals or
abrasive cleaners.
ASSEMBLY INSTRUCTION
-
Attach the mounting bracket(C)to the outlet box by using two mounting screws(E).
-
Pull out the outlet wires and housing grounding wire from the outlet box. Make wire connections using the wire nuts (B):
- WHITE wire with WHITE-NEUTRAL
- BLACK wire with BLACK-LIVE
- Attached the fixture grounding wire to mounting bracket with green grounding screw(A). Carefully tuck the wires back into the outlet box.
-
Secure the canopy to the metal mounting bracket (C) with screws provided (D).
-
Attached the lamp shade to the lamp holder(F), then secure it with socket ring(G).
Important Note: Socket ring comes pre-assembled and is located on the socket. -
Install the bulb H (not included).
E26 Type A.40W X 1 (Not included)
E26 CFL 13W X 1 (Not included)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>