River OF GOODS 20803 Isla 18.5 Inch 3-Light Gold Semi-Flush Mount with Bell-Shaped Rattan Shades Instruction Manual
- October 30, 2023
- River OF GOODS
Table of Contents
River OF GOODS 20803 Isla 18.5 Inch 3-Light Gold Semi-Flush Mount with
Bell-Shaped Rattan Shades
Product Information
- The product is a lamp with a mounting bracket and a lamp shade.
- The lamp requires a maximum wattage as mentioned on the caution label near the lamp holder. Do not exceed the maximum wattage.
- It is important to not replace the bulb(s) while the lamp is into a wall receptacle.
- Use only a soft cloth for cleaning purposes and avoid using any chemicals or abrasive cleaners.
- The product is made in China.
- The lamp requires an E12 Type B bulb with a maximum wattage of 40W X 3 or E12 CFL with a maximum wattage of 13W X 3. The bulbs are not included in the package.
Product Usage Instructions
-
Attach the mounting bracket(F) to the outlet box using two mounting screws(G).
- Connect WHITE wire with WHITE-NEUTRAL
- Connect BLACK wire with BLACK-LIVE Remove the outlet wires and housing grounding wire from the outlet box. Connect the wires using wire nuts(D):
Attach the fixture grounding wire to mounting bracket with green grounding screw(E). Carefully tuck the wires back into the outlet box.
-
Secure the canopy to the metal mounting bracket(F) with screws provided(H).
-
Attach the lamp shade(B) to the lamp holder(A) and secure it with socket ring(C).
-
Install the bulb(I) as per the required type and wattage mentioned in the product information section. The bulbs are not included in the package.
ASSEMBLY INSTRUCTION
CAUTION
- Refer to the wattage caution label located near the lamp holder for maximum wattage
- do not exceed the maximum wattage.
WARNING
- Do not attempt to replace the bulb(s) while the lamp is plugged into a wall receptacle
CARE INSTRUCTIONS
- Use only a soft cloth; do not use any chemicals or abrasive cleaners.
IMPORTANT SAFETY INSTRUCTIONS
- Attach the mounting bracket(F)to the outlet box by using two mounting screws(G).
- Pull out the outlet wires and housing grounding wire from the outlet box. Make wire connections using the wire nuts (D):
- WHITE wire with WHITE-NEUTRAL
- BLACK wire with BLACK-LIVE
- Attached the fixture grounding wire to mounting bracket with green grounding screw(E). Carefully tuck the wires back into the outlet box.
- Secure the canopy to the metal mounting bracket (F) with screws provided (H).
- Attached the lamp shade(B) to the lamp holder(A), then secure it with socket ring( C ).
- Install the bulb (I) (not included).
E12 Type B.40W X 3 (Not included)
E12 CFL 13W X 3 (Not included)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>