carmanah MX 200 MX Series Solar Panel Installation Guide
- June 12, 2024
- carmanah
Table of Contents
Carmanah MX 200 MX Series Solar Panel
Product Information: MX 200 Solar Panel Replacement Guide
The MX Series is a solar panel replacement guide provided by Carmanah
Technologies Corp. It is designed for the MX 200 model. The MX 200 is a solar-
powered device that requires periodic replacement of the solar panel assembly
for optimal performance.
Product Usage Instructions
- Unlock the MX 200 device and slide off the lock bar.
- Remove the four screws securing the solar panel to the MX 200 chassis.
- Disconnect the solar panel connector and remove the solar panel assembly.
- Remove the four solar panel lid screws.
- Squeeze the grommet snap features and push the grommet and cable end through the hole.
- Place the lid onto the replacement solar panel in the shown orientation.
- Insert the solar harness barrel connector through the hole in the lid.
- Push the grommet into the lid hole, ensuring it is fully snapped in place.
- Fasten the lid to the solar panel with four screws.
- Check the MX Field App to ensure that the solar panel is producing suitable voltage.
- Align the hook features on the lid with the tabs on the chassis.
- Mate the solar harness connectors and lower the solar panel assembly onto the chassis.
- Fasten the assembly with four screws.
- Slide the tab of the lock bar into the slot in the lid.
- Align the shackle holes and lock the MX 200 device.
If you have any further questions or need assistance, please contact Carmanah Technologies Corp. at 1.250.380.0052 or via email at customersupport@carmanah.com. You can also visit their website at carmanah.com.
- Unlock MX 200 and slide off lock bar.
- Remove four screws securing solar panel to MX 200 chassis.
- Disconnect solar panel connector and remove solar panel assembly
- Remove four solar panel lid screws.
- Squeeze grommet snap features and push the grommet and cable end through the hole
- Place lid onto the replacement solar panel in the orientation shown and insert solar harness barrel connector through hole in lid.
- Push grommet into lid hole ensuring it is fully snapped in place.
- Fasten lid to solar panel with four screws.
- Align hook features on lid with tabs on the chassis. Mate solar harness connectors.
- Lower solar panel assembly onto chassis and fasten with four screws.
- Slide tab of lock bar into slot in lid.
- Align shackle holes and lock MX 200.
Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 | customersupport@carmanah.com | carmanah.com
References
- Systems for Traffic Beacons and Signs | Solar LED Beacons | Carmanah
- Systems for Traffic Beacons and Signs | Solar LED Beacons | Carmanah
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>