River OF GOODS 20699 Raif 7.625 Inch 1-Bulb Brushed Gold Pendant Light Instruction Manual
- October 30, 2023
- River OF GOODS
Table of Contents
River OF GOODS 20699 Raif 7.625 Inch 1-Bulb Brushed Gold Pendant Light
Product Information
The product is a lamp that comes with a mounting bracket, canopy, lamp shade, socket ring, and wire nuts. The lamp is designed to be used with an E26 Type A bulb with a maximum wattage of 60W or an E26 CFL bulb with a maximum wattage of 13W. The product is made in China.
Product Usage Instructions
- Before assembly, refer to the wattage caution label located near the lamp holder for maximum wattage. Do not exceed the maximum wattage.
- Do not attempt to replace the bulb(s) while the lamp is plugged into a wall receptacle.
- Use only a soft cloth to clean the lamp. Do not use any chemicals or abrasive cleaners.
- Attach the mounting bracket (C) to the outlet box using two mounting screws (D).
- Pull out the outlet wires and housing grounding wire from the outlet box. Make wire connections using the wire nuts (B):
- Connect the WHITE wire with WHITE-NEUTRAL.
- Connect the BLACK wire with BLACK-LIVE.
- Attach the fixture grounding wire to the mounting bracket with a green grounding screw (A).
- Carefully tuck the wires back into the outlet box.
- Secure the canopy to the metal mounting bracket (C) with the screws provided (E).
- Attach the lamp shade (F) to the lamp holder, then secure it with a socket ring (G). Note: The socket ring comes pre-assembled and is located on the socket.
- Install the bulb H (not included).
ASSEMBLY INSTRUCTION
CAUTION – Refer to the wattage caution label located near the lamp holder
for maximum wattage – do not exceed the maximum wattage.
WARNING – Do not attempt to replace the bulb(s) while the lamp is plugged
into a wall receptacle
CARE INSTRUCTIONS – Use only a soft cloth; do not use any chemicals or
abrasive cleaners.
IMPORTANT SAFETY INSTRUCTIONS
-
Attach the mounting bracket(C)to the outlet box by using two mounting screws(D).
-
Pull out the outlet wires and housing grounding wire from the outlet box. Make wire connections using the wire nuts (B):
- WHITE wire with WHITE-NEUTRAL
- BLACK wire with BLACK-LIVE
- Attached is the fixture grounding wire to the mounting bracket with green grounding screw(A). Carefully tuck the wires back into the outlet box.
-
Secure the canopy to the metal mounting bracket (C) with the screws provided (E).
-
Attached the lamp shade (F) to the lamp holder, then secure it with a socket ring(G).
Important Note: The socket ring comes pre-assembled and is located on the socket. -
Install the bulb H (not included).
- E26 Type A.60W X 1 (Not included)
- E26 CFL 13W X 1 (Not included)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>