PEPE P30016 Shower Stool for Seniors Stable Bathroom Instruction Manual

PEPE P30016 Shower Stool for Seniors Stable Bathroom

Product Information

The PEPE Chair with Handles is designed to assist individuals with movement difficulties during personal cleaning by providing a stable seat in the bath or shower. The chair is available in black (P30016) and white (P30029) and has a weight capacity of 220 lb. It weighs 10.5 lb and features an ergonomic surface with drainage holes, non-slip tips, and a corrosion-free aluminum chassis with a polyethylene back and seat. The chair also has a removable armrest and can be adjusted from 17 to 21 inches in height in five positions without the use of tools.

Product Usage Instructions

1. Before using the PEPE Chair with Handles, read the provided manual and keep it for future reference.
2. To assemble the chair, follow the steps below:
3. Remove the legs.
4. Take the backrest (G) and insert the L-structures (F) until you hear a click.
5. Once assembled, insert the backrest (G) into the tubes at the base of the chassis (A) by pressing until you hear a click.
6. To adjust the height of the chair, use the regulations on the legs to suit the user’s needs.
7. To clean and disinfect the chair, follow the steps below:
8. Remove the legs.
9. Use water and a mild non-abrasive detergent to clean the separated parts.
10. Disinfect by cleaning all accessible surfaces with disinfectant.

Always keep the chair clean and wash it regularly. The manufacturer provides a warranty for the product in accordance with their General Terms and Conditions of Business in the respective countries.

CODE

PEPE – CHAIR WITH HANDLES (BLACK)|  | P30016
PEPE – CHAIR WITH HANDLES (WHITE)|  | P30029

CHAIR WITH HANDLES
Manual provided for the user of the product. BEFORE using this product, read this manual and keep it.

COMPONENTS

INDICATIONS OF USE

The PEPE-CHAIR WITH HANDLES should be used as an aid to sit in the bath or shower and to facilitate the seat for people with movement difficulties in personal cleaning. Its capacity is 220 lb and its weight is 10.5 lb.

FEATURES

• Assembly without the use of tools.
• Removable armrest.
• Quick and easy adjustment from 17” to 21” height in 5 positions according to the regulations used on the legs to suit the user.
• Ergonomic surface with drainage holes.
• Safe and stable thanks to its non-slip tips.
• Corrosion-free thanks to its aluminum chassis and polyethylen e back and seat.

ASSEMBLY

1. Turn the seat over (A) and you will see the assembled structure on which the legs, backrest and handles will be installed. Insert the legs (C) into each of the holes in the seat frame until they click, as shown in Figure 1. Make sure they are all at the same height and adjustment.
2. Adjust the brackets (B) as in Figure 2, using the levers (D) to secure them to the frame. Be sure to tighten the two levers on the tube.
3. Insert the armrest (E) into the protruding side holes of the brackets (B) by pressing down as in Figure 2.
4. Take the backrest (G) and insert the L-shaped structures (F) unt il you hear a click.
5. Once assembled, insert the backrest (G) into the tubes at the bottom of the frame (A) by pressing down until you hear a click.
6. Check that the height is the same on all legs or adjust as r equired.

Dimension

WARNINGS

• Check all parts for all components or if there was any damage during shipping.
• Make sure all four legs are adjusted to the same height.
• Make sure the fasteners click into the holes in the legs.
• Don´t use for side transfers or part load.
• Don´t sit on it, unless all four legs are fully in contact with the ground. Use the product only on even ground.
• Don´t stand up in the chair .
• The user must be able to maintain balance in case of use withou t an assistant.
• Any serious incident related to the product must be reported to the manufacturer and the competent authority of the Member State in which the user and patient are established.

CLEANING AND DISINFECTION

The product can be cleaned and disinfected with products available on the market. Always keep the product clean and wash it regularly.

1. Remove the legs.
2. Use water and a mild non-abrasive detergent to clean the sep arated parts.
3. Disinfect by cleaning all accessible surfaces with disinfect ant.

WARRANTY INFORMATION

We provide a manufacturer’s warranty for the product in accordance with our General Terms and Conditions of Business in the respective countries.

IMPROVING MOBILITY DEVELOPMENT S.L.
Avda. Mare Nostrum 1, Bloque 1, Pta 16 46120, Alboraya, Valencia, Spain
admin@kmina.com. | www.kmina.com.

References

• KMINA | Inspiramos a las personas a vivir sin límites — kmina.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>