PEPE P40007 Adjustable Bed Backrest User Manual
- June 9, 2024
- Pepe
Table of Contents
PEPE P40007 Adjustable Bed Backrest
INTRODUCTION
The PEPE – ADJUSTABLE BED BACKREST is recommended for incorporating bedridden patients or people with reduced mobility so that they can perform tasks comfortably. Measurements: 26.3”x23.6”. Pad: 11”x6”. Material: steel and polyester. Weight: 5 lb.
INSTRUCTIONS FOR USE
- The product is assembled, ready for use. Unfold the backrest by pulling on the rear tubes.
- Always put the cover in front. The user will be placed on top.
- Depending on the regulation you want, it has 5 adjustments with degrees of inclination from 25º to 80º and a height of 13.5” to 23.6”.
- Once stable, position the user in the desired position. Use the pad if you like or remove it easily with the velcro strips.
WARNINGS
- The maximum user weight is 240 lb.
- Inspect periodically for wear and damage. The product should not be stored outdoors.
- Before each use, make sure the product is properly assembled and in a stable position.
- The product can only be used on unobstructed surfaces.
- Risk of injury to fingers may increase during assembly or assembly process.
- Do not modify the product and its components in any way, or use the product for a purpose other than its intended use.
- Do not use the product if it is damaged or altered in any way.
MAINTENANCE
- Can be cleaned with soap and water with a cloth.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>