Gude GTB 16-605 Table Drill Instruction Manual
- October 30, 2023
- Gude
Table of Contents
- DELIVERED ITEMS
- Assembly Instrcuctions
- Spindle speed
- Clamp drill
- Clamp the workpiece
- Starting-up the machine
- Operation
- Spindle lock
- Maintenance
- Technical Data
- General safety information
- Mains Connection
- Inspection and maintenance plan
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Gude GTB 16-605 Table Drill Instruction Manual
Please read the instructions carefully before starting the machine.
DELIVERED ITEMS
Assembly Instrcuctions
Spindle speed
Clamp drill
Clamp the workpiece
Starting-up the machine
Operation
Spindle lock
Maintenance
Technical Data
Bench drill | GTB 16/605 | GTB 16/612 R+L |
---|---|---|
Art. No | 55202 | 55204 |
Mains voltage | 230 V | 400 V |
Mains frequency | 50 Hz | 50 Hz |
Safety class | I | I |
Motor power | 600 W / S1 | 600 W / S1 |
Spindle stroke | 60 mm | 60 mm |
Spindle speed | 630 – 2700 min-1 | 630 – 2700 min-1 |
Number of steps | 5 | 5 |
Reach | 125 mm | 125 mm |
Drill chuck range | 1 – 16 mm | 1 – 16 mm |
Drill chuck cone | B 16 | B16 |
Spindle receiver | MK 2 | MK 2 |
max. Drilling capacity in steel | 16 mm | 16 mm |
Table size WxD | 200 x 200 mm | 200 x 200 mm |
Base plate WxD | 235 x 355 mm | 235 x 355 mm |
Diameter of columns | 60 mm | 60 mm |
Length of connecting cable | 2,0 m | 2,0 m |
Type of cable | H05VV-F | H05VV-F |
Length | 540 mm | 540 mm |
Width | 300 mm | 310 mm |
Height | 850 mm | 845 mm |
Net/gross weight | 31 / 32 kg | 31 / 32 kg |
Noise details
Sound pressure level LpA| 62 dB (A)| 62 dB (A)
Sound power level LWA| 75 dB (A)| 75 dB (A)
Wear ear protectors!
The numerical values given are emission levels and not necessarily safe working levels. Although there is a correlation between the emission levels and the acceptable exposure levels, they cannot be reliably used to determine whether or not any additional safety measures are necessary. The characteristics of the work space, other sources of noise, i.e. the number of machines and other processes running in the vicinity and so on, are all factors that can influence the actual exposure levels of the employees. Moreover, the acceptable exposure levels can vary from country to country. This information should enable the machine‘s operator to carry out a better assessment of the risks and hazards.
Read and understand the operating instructions before using the appliance. Familiarise with the control elements and how to use the appliance properly. Abide by all the safety measures stated in the service manual. Act responsibly toward third parties.
The operator is responsible for accidents or risks to third parties.
Persons over 16 years of age can only work on the appliance. An exception includes youngsters trained in order to reach knowledge under supervision of the trainer during occupational education.
In case of any doubts about connection and operation refer please to our customer center
Specified Conditions Of Use
Bench drilling machine for light and medium drilling work in wood, metals and
plastics.
The machine may only be used in a technically perfect condition and taking
into account all safety information.
Do not use this product in any other way as stated for normal use. Not observing general regulations in force and instructions from this manual does not make the manufacturer liable for damages.
It is strictly prohibited to disassemble, modify and purposely remove the protective equipment on the unit and fit other protective equipment instead.
- Even when the device is used properly and all safety regulations are complied with, there still may be some residual risks.
- noise emissions
- dust emissions
- vibrations to hand and arms
- Danger of burns Tool and workpiece heat up during operation.
- Risk of injury
Sharp tools and workpiece edges
Emergency procedure
Conduct a first-aid procedure adequate to the injury and summon qualified
medical attendance as quickly as possible. Protect the injured person from
further harm and calm them down. If you seek help, state the following pieces
of information: 1. Accident site, 2. Accident type, 3. Number of injured
persons, 4. Injury type(s)
Symbols
WARNING/CAUTION!
Warning against cutting injury
Warning against dangerous electric voltage
Warning against thrown-off item
Unplug the machine before any work on it.
Wear eye protective goggles ! Wear ear protectors!
Keep dry at all times. Never expose tool to rain.
Always keep children and unauthorised persons out of reach of the appliance.
Forbidden operation for persons with chainlet
Forbidden operation for persons with long hair.
Do not operate the power tool when wearing a tie
Any damaged or disposed electric or electronic devices must be delivered to appropriate collection centres
CE marking
General safety information
WARNING!
When using electric tools the following general safety instructions must be
obeyed to protect yourself from electric shocks, injury and fire risks.
Read all these instructions before using this electric tool and keep the safety instruction in a safe place.
Keep your work area clean and tidy. Untidy work- places and workbenches increase the risk of accidents and injuries.
Do not expose the appliance to rain and do not use it in wet or moisture conditions.
Provide adequate lighting or good lighting conditions when working with the machine.
Do not work with electric tools in conditions with flammable liquids, gases or dust. Electric tools produce sparks able to ignite dust or fumes.
Protect yourself from electric shock. Avoid body contact with earthed objects (for example pipes, radiators, electric stoves and cooling units). There is an increased risk of electric shock if your body is earthed.
Keep children and bystanders away while operating a power tool. Do not touch the electric tool or the cable. When not concentrated, you may lose control over the machine.
Ensure that you store electric tools in a safe place. Tools which are not in used must be stored in a dry place as high as possible out of the reach of children or in an inaccessible place.
Do not overload the machine. Use appropriate electric tools for your work. Working with appropriate electric tools is better and safer when within the specified power range. They will work better and more safely in the specified power range.
Do not use the electric tool for purposes for which it is not designed. For example, do not use a manual circular saw for cutting branches or logs.
Dress properly. Do not wear loose clothing or jewellery. Keep your hair,
clothing and gloves away from
moving parts. We recommend that you wear non-slip shoes when working outdoors.
Wear a hairnet if you have long hair.
Use protective equipment which fit you. Wear safety goggles and ear protection at all times. A dust mask or respirator is also required. Wear tight-fitting gloves at all times when handling sharp blades and saw blades,
If dust exhausters and catchers are to be installed, make sure they are fitted and used properly. Using a dust exhauster may reduce the exposure to dust.
Do not use the cable in conflict with its designation, to carry or hang electric tools or to pull the plug out of socket. Protect the cable against high temperatures, oil, sharp edges or moving parts of the machine. Damaged or entangled cables increase the risk of electric shock.
Secure the workpiece. Use clamping equipment or a vice to secure the workpiece. This will be safer than holding it in your hand.
Avoid any abnormal body posture. Provide good stability and keep balance at all times. By this, electric tools are better controlled in unexpected situations.
Treat electric tools carefully.
Keep the cutting tools sharp and clean. Carefully treated cutting tools with sharp edges get stuck less often and are easier to guide.
Follow the instructions for lubricating and changing tools.
Check the connection cable on the electric tool at regular intervals and have it replaced by an expert if it is damaged.
Check the extension cables at regular intervals and replace them if they are damaged.
Keep the handles dry, clean and free of oil and grease.
Pull the plug out of the socket and/or remove the battery when the tool is not in use before you make machine settings or change accessories, such as the saw blade, drill bit or cutter. This safety measure prevents unintentional starting of the electric tool.
Before starting any electric tool, remove any adjusting wrenches and screwdrivers. A tool or a wrench present in the rotating part of the machine may lead to injuries.
Prevent the machine from unintentional starting. Before plugging and/or connecting the machine to battery, handling or carrying, make sure the electric tools are switched off. Having a finger on the switch when carrying the electric tool or when the machine is on when plugging it may lead to injuries.
If you wish to work outdoors with an electric tool, only use extension cables which are approved for outdoor use and are marked accordingly. Using an extension cable suitable for outdoor use reduces the risk of electric shock.
Be careful, pay attention to what you are doing and use common sense when working with electric tools. Do not use electric tools when you are tired or under the influence of drugs, alcohol or pharmaceuticals. A moment if inattention when using electric tools may lead to serious injuries.
Check the machine for any damage:. Before using the equipment again, the protective equipment must carefully be checked if safe and working as designated.
Check the moving parts for perfect functioning, if working smoothly and if no parts are damaged. To provide safe operation of the equipment, all parts must be installed properly and meet all conditions.
Damaged protective equipment and parts must be professionally repaired or replaced by a recognised professional workshop, unless otherwise specified in the Operating Instructions.
Do not use electric tools with a defective switch. An electric tool that cannot be switched on or off is dangerous and must be repaired.
Have your electric tool repaired by an electrician. This electric tools complies with the relevant safety regulations. Repairs may only be carried out by an electrician using genuine spare parts; otherwise the user may suffer accidents.
Caution!
The machine must be secured to the floor using suitable screws since otherwise
there is a risk that it will tip over.
Inspect before each use.
- Proper function of the on and off button, incl. the mergency switch.
- Carry out a visual inspection before switching the appliance on.
- Check especially the safety equipment, electrical control elements, power lines and screw couplings for any damage and if they are tightened appropriately. If necessary, replace damaged parts before operation.
- Ensure that the bench clamping lever is tightly secured before starting up the machine.
- Ensure that the drill is safely secured in the clamping chuck.
- REMOVE ADJUSTING KEYS AND WRENCHES. From habit of checking to see that keys and adjusting wrenches are removed from tool before turning it “ON”
Risk of injury!
Keep body parts and clothes away from rotating parts of the device.
Use protective equipment which fit you.
Wear a hairnet if you have long hair.
Do not wear gloves when operating a drill.
Do not attempt to drill into a material that does not have a flat surface, unless you are using a suitable support.
Never start the drilling machine with the drill pressed against the workpiece.
Always use clamps, chuck jaws or a vice to secure the workpiece to the bench.
Set the drilling machine to a speed that is appropriate for the specific job.
In the event of a blockage, switch off the machine immediately. Pull out the mains plug and remove the jammed workpiece.
Chips and splinters must not be removed while the machine is running.
Mains Connection
Operation is only allowed with a safety switch against stray current (RCD max. stray current of 30mA).
Connect only to a single-phase AC current supply and only to the mains voltage specified on the rating plate. Must only be used from sockets with earth wire.
Only plug-in when machine is switched off.
Maintenance
Unplug the machine before any work on it.
Carry out a visual inspection before switching the appliance on.
The appliance must not be used if damaged or safety equipment is defective. Replace any worn-out and damaged parts.
Caution! If the power cord of the appliance gets damaged, it must be replaced by the manufacturer or its customer service or a similarly qualified person to avoid danger.
Repairs and works specified in these Instructions may only be performed by qualified authorised staff.
Use only original accessories and original spare parts.
Keep the device, in particular the air vents, clean at all times. Never spray water on the device body!
Do not clean the plastics with solvents, flammable or toxic fluids. For cleaning, use a damp cloth only. Apply environment-friendly oil to all moving parts.
Only a regularly maintained and treated appliance can serve as a satisfactory aid. Insufficient maintenance and care can lead to unforeseen accidents and injuries.
If necessary, a list of spare parts can be found at www.guede.com.
Guarantee
Warranty period of 12 months applies to commercial use and 24 months applies
to private use and commences on the day of purchase of the device.
The guarantee solely covers inadequacies caused by material defect or manufacturing defect. Original payment voucher with the sales date needs to be submitted for any claim in the guarantee period.
The guarantee does not cover any unauthorised use such as appliance overloading, use of violence, damage as a result of any unauthorised interference or caused by foreign items. Failing to follow the operating and assembly instructions and common wear are also not included in the guarantee.
Important information for the customer
Please be sure to know that returning the product in or after the warranty
period must be made in the original packaging.
Service
Do you have any technical questions? Any claim? Do you need any spare parts or
operating instructions? We will quickly help you and without needles
bureaucracy at our web pages at www.guede.com in the Servicing part. Please
help us be able to help you. In order to identify your device in case of claim
we need the serial No., product No. and year of production. All this data can
be found on the type label.
Tel.: +49 (0) 79 04 / 700-360
Fax: +49 (0) 79 04 / 700-51999
E-Mail: support@ts.guede.com
Inspection and maintenance plan
Regular servicing period| Before any start-up| After
every start-up| If necessary
---|---|---|---
Check the safety devices| | |
Inspect and, if necessary, tighten the fan belts| | |
Lubricate the columns and the bench with a thin layer of oil| | ****|
Clean the tapered mandrel| | |
Clean the machine of drilling dust or metal shavings| | |
GÜDE GmbH & Co. KG
Birkichstrasse 6
74549 Wolpertshausen
Deutschland
Tel.: +49-(0)7904/700-0
Fax.: +49-(0)7904/700-250
eMail: info@guede.com
References
- Güde | Maschinen & Werkzeuge für den Hand- & Heimwerker
- Güde | Maschinen & Werkzeuge für den Hand- & Heimwerker