C Cattleya LLA2333-WB 4.5-in Black Integrated Outdoor Wall Light Instruction Manual
- October 30, 2023
- C Cattleya
Table of Contents
C Cattleya LLA2333-WB 4.5-in Black Integrated Outdoor Wall Light
*WARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER.*
ATTENTION! COUPER LE COURANT AU FUSIBLE OU UN DISJONCTEUR.**
ASSEMBLING THE FIXTURE (Fig.1)
- Shut off the power at the circuit breaker box. Remove old fixture and all hardware from Junction Box. Carefully unpack your new fixture and lay out all the parts on a clear area. Take care not to lose any small parts necessary for installation.
- Attach the mounting plate(B) to the junction box using two junction box screws as shown. The side of the mounting plate marked “GND” must face out. The junction box is not included.
- Follow wiring instructions carefully.(see fig.2)
- Install housing (A) on the mounting plate(B) and secure it with mounting screw (D).
CONNECTING THE WIRES (Fig.2)
- Connect the electrical wires as follows. Connect the Black wire from the fixture to the black house (hot) Wire. Connect the white wire from the fixture to the white (neutral) house wire. Make sure all wire nuts are secured. You may wrap the connections with electrical tape. If your outlet box has a ground wires (green or bare copper) connect fixture’s ground wire to it. Otherwise attach the bare copper fixture wire to the green ground screw on the mounting plate.
- Tuck the wire connections neatly into the wall junction box.
Your installation is now complete. Return power to the junction box and test the fixture.
MADE IN CHINA
LA2333-WB/LA2333-WW
Documents / Resources
| C
Cattleya LLA2333-WB 4.5-in Black Integrated Outdoor Wall
Light
[pdf] Instruction Manual
LLA2333-WB 4.5-in Black Integrated Outdoor Wall Light, LLA2333-WB, 4.5-in
Black Integrated Outdoor Wall Light, Integrated Outdoor Wall Light, Outdoor
Wall Light, Wall Light, Light
---|---
Read User Manual Online (PDF format)
Loading......