C Cattleya CA2271-H Light Black Goble Rattan Pendant Light Instruction Manual
- October 30, 2023
- C Cattleya
Table of Contents
C Cattleya CA2271-H Light Black Goble Rattan Pendant Light
Product Information
The product model number is CA2271-H. This product is an electrical fixture that requires assembly and installation. It is important to follow the instructions carefully to avoid any risk of electrical shock. The fixture requires a bulb, which is not included in the package.
Product Usage Instructions
- Before beginning installation, make sure to shut off the power to the area where the fixture will be installed.
- Assemble the fixture according to the instructions provided in the package.
- Identify the live wire and black wire, and connect them together using the mounting screw.
- Identify the negative wire and white wire, and connect them together using the other mounting screw.
- Attach the mounting plate to the wall or ceiling where the fixture will be installed.
- Connect the wires from the fixture to the wires in the electrical box in the wall or ceiling, following standard electrical wiring procedures.
- Attach the fixture to the mounting plate using the screws provided.
- Install a bulb of the appropriate type and wattage, following any additional instructions provided by the manufacturer of the bulb.
- Turn on the power and test the fixture to ensure that it is working properly.
It is important to follow all safety guidelines and instructions provided in the package when installing and using this product. If you have any questions or concerns, consult a qualified electrician or contact the manufacturer for assistance.
ASSEMBLY AND INSTALLATION INSTRUCTIONS
WARNING: TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF POWER WHILE INSTALLING OR SERVICING THIS FIXTURE.
NOTES
- Before installing, consult local electrical codes for wiring and grounding requirements.
- READ AND SAVE THESE INSTRUCTIONS.
- Attach the mounting plate to the outlet box by using two mounting screws.
- Pull out the wires and grounding wire from the outlet box. Make wire connections using the wire nuts. as follow:
- Connect the hot wire (usually black insulation) from the fixture to the black wire from the power source.
- Connect the neutral wire (usually white insulation) from the fixture to the white wire from the power source.
- Attach the fixture grounding wire (usually green insulation or bare wire) to the mounting strap with the green grounding screw. Then connect it to the house grounding wire with the wire nut. Carefully put the wires back into the outlet box.
- Attach the back plate to the mounting plate by inserting the screws, then secure it with two nuts.
CAUTION: With silicone caulking compound, caulk completely around where the back plate meets with the wall surface to prevent water from seeping into the outlet box. Turn on the power at fuse or circuit box.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>