River OF GOODS 20634 Hadley 8 in. 1-Light Gold Pendant Instruction Manual
- October 30, 2023
- River OF GOODS
Table of Contents
River OF GOODS 20634 Hadley 8 in. 1-Light Gold Pendant
Product Information
- The product is a lamp that requires assembly.
- The maximum wattage allowed should not exceed the value indicated on the wattage caution label located near the lamp holder.
- Do not attempt to replace the bulb(s) while the lamp is plugged into a wall receptacle.
- Use only a soft cloth; do not use any chemicals or abrasive cleaners.
- The product is made in China.
- The lamp requires an E26 Type A.40W X 1 or E26 CFL 13W X 1 bulb (not included).
Product Usage Instructions
- Attach the mounting bracket (C) to the outlet box using the two mounting screws (E).
- Connect the WHITE wire with WHITE-NEUTRAL.
- Connect the BLACK wire with BLACK-LIVE.
- Attach the fixture grounding wire to mounting bracket with green grounding screw (A).Pull out the outlet wires and housing grounding wire from the outlet box and make wire connections using the wire nuts (B): Carefully tuck the wires back into the outlet box.
- Secure the canopy to the metal mounting bracket (C) with screws provided (D).
- Attach the lamp shade to the lamp holder (F) and secure it with socket ring (G).
Note : The socket ring comes pre-assembled and is located on the socket.
- Install the required bulb (E26 Type A.40W X 1 or E26 CFL 13W X
- into the lamp holder (F).
IMPORTANT SAFETY INSTRUCTIONS
CAUTION – Refer to the wattage caution label located near the lamp holder for maximum wattage – do not exceed the maximum wattage.
WARNING – Do not attempt to replace the bulb(s) while the lamp is plugged into a wall receptacle
CARE INSTRUCTIONS
Use only a soft cloth; do not use any chemicals or abrasive cleaners
ASSEMBLY INSTRUCTION
-
Attach the mounting bracket(C)to the outlet box by using two mounting screws(E).
-
Pull out the outlet wires and housing grounding wire from the outlet box. Make wire connections using the wire nuts (B):
-
WHITE wire with WHITE-NEUTRAL
-
BLACK wire with BLACK-LIVE
-
Attached the fixture grounding wire to mounting bracket with green grounding screw(A). Carefully tuck the wires back into the outlet box.
-
Secure the canopy to the metal mounting bracket (C) with screws provided (D).
-
Attached the lamp shade to the lamp holder(F), then secure it with socket ring(G).
Important Note : Socket ring comes pre-assembled and is located on the socket. -
Install the bulb H (not included).
- E26 Type A.40W X 1 (Not included)
- E26 CFL 13W X 1 (Not included)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>