River OF GOODS 20630 Harlow Wall Sconce Instruction Manual
- October 30, 2023
- River OF GOODS
Table of Contents
River OF GOODS 20630 Harlow Wall Sconce
Product Information
This product is a wall-mounted lamp that requires assembly and installation. It is manufactured in China and comes with an E26 Type A bulb socket that can accommodate a maximum of 40W or an E26 CFL bulb with a maximum of 13W. The lamp shade, socket ring, and bulb are not included in the package. The product comes with mounting screws and a hidden line tube for secure installation.
Product Usage Instructions
- Before starting the assembly, refer to the wattage caution label located near the lamp holder for maximum wattage. Do not exceed the maximum wattage.
- Attach the wall box to the wall using two mounting screws(A).
- Secure the hidden line tube to the wall box with two mounting screws(B).
- Connect tube (G) to (F) to the light body, then carefully pull out excess wire from tube (G) while assembling to prevent the cord from becoming twisted and snagged
- Nail (H) to the wall and secure (I) with two mounting screws (J).
- Connect the lamp shade (C) to the lamp holder and secure it with the socket ring(D). The Socket Ring is located on the socket.
- Install a bulb (E) that fits the specifications mentioned above.
- Caution: Do not attempt to replace the bulb while the lamp is plugged into a wall receptacle.
- Care Instructions: Use only a soft cloth to clean; do not use any chemicals or abrasive cleaners.
Following these instructions will ensure safe and optimal usage of the wall- mounted lamp.
ASSEMBLY INSTRUCTION
- CAUTION – Refer to the wattage caution label located near the lamp holder for maximum wattage – do not exceed the maximum wattage.
- WARNING – Do not attempt to replace the bulb while the lamp is plugged into a wall receptacle
- CARE INSTRUCTIONS – Use only a soft cloth; do not use any chemicals or abrasive cleaners.
IMPORTANT SAFETY INSTRUCTIONS
- Attach the wall box to the wall by using two mounting screws(A).
- Secure the hidden line tube to wall box with two mounting screws(B).
- Connect tube (G) to (F) to the light body ,then carefully pull out excess wire from tube (G) while assembling to prevent the cord from becoming twisted and snagged.
- Nailed (H) to the wall and secure (I) with two mounting screws (J).
- Connect the lamp shade (C) to the lamp holder and secure with the socket ring(D) .(Socket Ring located on socket)
- Install bulb (E) not include.
E26 Type A.40W X 1 (Not included) E26 CFL 13W X 1 (Not included)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>