RIVER OF GOODS 20648 Asher 5 Inch 1 Light Gold Pillar Pendant Instruction Manual
- October 30, 2023
- River OF GOODS
Table of Contents
RIVER OF GOODS 20648 Asher 5 Inch 1 Light Gold Pillar Pendant
Product Information
- The product is a lamp fixture.
- The maximum wattage of the bulb that can be used with the lamp is specified on a label near the lamp holder. It is important not to exceed the maximum wattage.
- The lamp shade is attached to the lamp holder using a socket ring which comes pre-assembled with the product.
- The lamp requires a bulb of type E26 Type A.40W X 1 or E26 CFL 13W X 1. The bulb is not included in the product package.
Product Usage Instructions
- Refer to the wattage caution label located near the lamp holder for maximum wattage. Do not exceed the maximum wattage.
- Before replacing the bulb(s), ensure that the lamp is unplugged from the wall receptacle.
- Use only a soft cloth to clean the lamp. Do not use any chemicals or abrasive cleaners.
- Attach the mounting bracket(C) to the outlet box using two mounting screws(E).
- Pull out the outlet wires and housing grounding wire from the outlet box. Make wire connections using the wire nuts (B):
- WHITE wire with WHITE-NEUTRAL
- BLACK wire with BLACK-LIVE
- Attach the fixture grounding wire to the mounting bracket with a green grounding screw(A). Carefully tuck the wires back into the outlet box.
- Secure the canopy to the metal mounting bracket (C) with the screws provided (D).
- Attach the lampshade to the lamp holder(F), then secure it with a socket ring(G). Note that the socket ring comes pre-assembled and is located on the socket.
- Insert a bulb of type E26 Type A.40W X 1 or E26 CFL 13W X 1. The bulb is not included in the product package.
- Plug the lamp into a wall receptacle and turn it on.
ASSEMBLY INSTRUCTION
- CAUTION – Refer to the wattage caution label located near the lamp holder for maximum wattage – do not exceed the maximum wattage.
- WARNING – Do not attempt to replace the bulb(s) while the lamp is plugged into a wall receptacle
- CARE INSTRUCTIONS – Use only a soft cloth; do not use any chemicals or abrasive cleaners.
IMPORTANT SAFETY INSTRUCTIONS
- Attach the mounting bracket(C)to the outlet box by using two mounting screws(E).
- Pull out the outlet wires and housing grounding wire from the outlet box. Make wire connections using the wire nuts (B):
- WHITE wire with WHITE-NEUTRAL
- BLACK wire with BLACK-LIVE
- Attached is the fixture grounding wire to the mounting bracket with green grounding screw(A). Carefully tuck the wires back into the outlet box.
- Secure the canopy to the metal mounting bracket (C) with the screws provided (D).
- Attached the lampshade to the lamp holder(F), then secure it with a socket ring(G).
Important Note: The socket ring comes pre-assembled and is located on the socket.
E2 6 T type A. 4 0 W X 1 ( Not in c lu ded) E2 6 CFL 1 3W X 1 (Not included)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>