River OF GOODS 20887 Sidonie 11 in. Brushed Gold Metal Novelty Table Lamp Instruction Manual
- October 30, 2023
- River OF GOODS
Table of Contents
River OF GOODS 20887 Sidonie 11 in. Brushed Gold Metal Novelty Table Lamp
Product Information
This product is a lamp that requires assembly. It comes with a lamp holder, a lamp shade, a socket ring, and petals to be attached to the frame. The lamp can use a maximum of 40W E12 Type A bulb or a 7W E12 CFL bulb, which are not included in the package. The lamp holder has a wattage caution label that indicates the maximum wattage for the bulb.
Product Usage Instructions
- Place all parts on a smooth flat surface.
- Install the lamp shade (B):
- Check each part carefully to avoid any missing.
- Install the frame (12) to plate (11) one by one.
- Connect petals from (1) to (10) according to the diagram.
- Repeat to install the remaining petals according to the diagram.
- Attach lamp shade (B) to the lamp holder (A), then secure with socket ring(C). Socket rings come located on the lamp holder.
- Install the bulb(D), not included:
- CAUTION – Refer to the wattage caution label located near the lamp holder for maximum wattage – do not exceed the maximum wattage.
- WARNING – Do not attempt to replace the bulb(s) while the lamp is plugged into a wall receptacle.
- CARE INSTRUCTIONS – Use only a soft cloth; do not use any chemicals or abrasive cleaners.
ASSEMBLY INSTRUCTION
- CAUTION : Refer to the wattage caution label located near the lamp holder for maximum wattage
- do not exceed the maximum wattage.
- WARNING : Do not attempt to replace the bulb(s) while the lamp is plugged into a wall receptacle
- CARE INSTRUCTIONS : Use only a soft cloth; do not use any chemicals or abrasive cleaners.
IMPORTANT SAFETY INSTRUCTIONS
- Place all parts on a smooth flat surface.
- Install lamp shade (B)
- Check each part carefully to avoid any missing.
- Install the frame (12) to plate (11) one by one.
- Connect petals from (1) to (10) according to the diagram.
- Repeated to Install the remaining petals according to the diagram.
- Attached lamp shade (B) to the lamp holder (A), then secure with socket ring(C). Socket rings comes located on the lamp holder.
- Install the bulb(D), not include.
- E12 Type A.40W X 1 (Not included)
- E12 CFL 7W X 1 (Not included)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>