RIVER OF GOODS 20609 5-Light Rattan and Nickel Boho Semi-Flush Mount Light Instruction Manual
- October 30, 2023
- River OF GOODS
Table of Contents
RIVER OF GOODS 20609 5-Light Rattan and Nickel Boho Semi-Flush Mount
Light
Product Information
This product is a lamp with a mounting bracket, canopy, adjustable tubes, lamp shade, and socket ring. It comes with assembly instructions and important safety instructions. The lamp requires E12 Type B 25W X 5 or E12 CFL 5W X 5 bulbs (not included). The product is made in China.
Product Usage Instructions
- Refer to the wattage caution label located near the lamp holder for maximum wattage. Do not exceed the maximum wattage.
- Do not attempt to replace the bulb(s) while the lamp is plugged into a wall receptacle.
- Use only a soft cloth to clean the lamp. Do not use any chemicals or abrasive cleaners.
- Attach the mounting bracket (D) to the outlet box (H) using two mounting screws (E).
- Pull out the outlet wires and housing grounding wire from the outlet box. Make wire connections using the wire nuts (G):
- WHITE wire with WHITE-NEUTRAL
- BLACK wire with BLACK-LIVE
- Attach the fixture grounding wire to mounting bracket with green grounding screw (F).
- Carefully tuck the wires back into the outlet box.
- Secure the canopy (A) to the metal mounting bracket (D) with screws provided (I).
- Turn the 2 short adjustable tubes to suitable position before shade installed.
- Attach the lamp shade (B) to the lamp holder (A), then secure it with socket ring (C). Important Note: Socket ring comes pre-assembled and is located on the socket.
- Install the bulb according to the type and wattage specified.
ASSEMBLY INSTRUCTION
- CAUTION – Refer to the wattage caution label located near the lamp holder for maximum wattage – do not exceed the maximum wattage.
- WARNING – Do not attempt to replace the bulb(s) while the lamp is plugged into a wall receptacle
- CARE INSTRUCTIONS – Use only a soft cloth; do not use any chemicals or abrasive cleaners.
IMPORTANT SAFETY INSTRUCTIONS
- Attach the mounting bracket(D)to the outlet box(H) by using two mounting screws(E).
- Pull out the outlet wires and housing grounding wire from the outlet box. Make wire connections using the wire nuts (G):
- WHITE wire with WHITE-NEUTRAL
- BLACK wire with BLACK-LIVE
- Attached the fixture grounding wire to mounting bracket with green grounding screw(F). Carefully tuck the wires back into the outlet box.
- Secure the canopy (A) to the metal mounting bracket (D) with screws provided (I).
- Turn the 2 short adjustable tubes to suitable position before shade installed.
- Attached the lamp shade(B) to the lamp holder(A), then secure it with socket ring(C).
Important Note: Socket ring comes pre-assembled and is located on the socket
- E12 Type B 25W X 5 (Not included)
- E12 CFL 5W X 5 (Not included)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>