C Cattleya CA2277-H 3-Light Black Farmhouse Boho Chandelier Instruction Manual
- October 30, 2023
- C Cattleya
Table of Contents
C Cattleya CA2277-H 3-Light Black Farmhouse Boho Chandelier
Product Information
The product model number is CA2277-H. The product is an electrical fixture that requires assembly and installation. The fixture comes with a frame and a threaded ring for securing it in place. The fixture is designed to hold a bulb, which is not included. The fixture has live wire and ground wire connections, as well as a negative wire connection. The fixture also has a screw collar loop for attaching it to an outlet box.
Product Usage Instructions
Before installing or servicing the fixture, ensure that the power is shut off to avoid the risk of electrical shock.
- Attach the fixture’s screw collar loop to the outlet box using the long screws provided.
- Connect the live wire from the outlet box to the live wire connection on the fixture.
- Connect the ground wire from the outlet box to the ground wire connection on the fixture.
- Connect the negative wire from the outlet box to the negative wire connection on the fixture.
- Secure the fixture in place by attaching the threaded ring to the outlet box using the square and ridge screws.
- Insert a bulb into the fixture (not included).
- Test the fixture to ensure that it is functioning properly.
WARNING:
TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF POWER WHILE INSTALLING
OR SERVICING THIS FIXTURE
NOTES:
- Before installing, consult local electrical codes for wiring and grounding requirements.
- READ AND SAVE THESE INSTRUCTIONS.
ASSEMBLY AND INSTALLATION
- Attach the mounting plate to the outlet box by using two mounting screws.
- Pull out the wires and grounding wire from the outlet box. Make wire connections using the wire nuts, as follow:
- Connect the hot wire (usually black insulation) from the fixture to the black wire from the power source.
- Connect the neutral wire (usually white insulation) from the fixture to the white wire from the power source.
- Attach the fixture grounding wire (usually green insulation or bare wire) to the mounting strap with the green grounding screw. Then connect it to the house grounding wire with the wire nut. Carefully put the wires back into the outlet box.
- Attach the back plate to the mounting plate by inserting the screws, then secure it with two nuts.
CAUTION:
With silicone caulking compound, caulk completely around where the back plate
meets with the wall surface to prevent water from seeping into the outlet box.
Turn on the power at fuse or circuit box.