V I V O MOUNT-KB05EL Black Clamp-on Keyboard Tray with RGB Lights Instruction Manual
- October 30, 2023
- V I V O
Table of Contents
Black Clamp-on Keyboard Tray with RGB Lights
Instruction Manual
MOUNT-KB05EL Black Clamp-on Keyboard Tray with RGB Lights
SKU: MOUNT-KB05EL
https://vivo-us.com/products/mount-kb05el
Scan the QR code with your mobile device or follow the link for helpful videos
and specifications related to this product.
https://vivo-us.com/products/mount-kb05el
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
| help@vivo-us.com
---|---
| www.vivo-us.com
Chat live with an agent!
| 309-278-5303
WARNING!
If you do not understand these directions, or if you have any doubts about the
safety of the installation, please call a qualified technician. Check
carefully to make sure there are no missing or defective parts. Improper
installation may cause damage or serious injury. Do not use this product for
any purpose that is not explicitly specified in this manual. Do not exceed
weight capacity. We cannot be liable for damage or injury caused by improper
mounting, incorrect assembly or inappropriate use.
WARNING: CHOKING HAZARD
SMALL PARTS – NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
PACKAGE CONTENTS
NOTE: SOME HARDWARE
INCLUDED MAY NOT BE USED
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
ASSEMBLY STEPS
STEP 1
Assemble Keyboard Tray (A) using Connecting Plates (B) and M5x12mm Flat Head
Screws (S-C).
Tighten with a Phillips screwdriver. Connect cables in Keyboard Tray (A) and
then apply Tape (G) over exposed area.
STEP 2
Attach Keyboard Stop (C) to the back of Keyboard Tray (A) using M5x12mm Flat
Head Screws (S-C) and a Phillips screwdriver.
STEP 3
Assemble Slider Brackets (D) to Keyboard Tray (A) using M5x12mm Screws (S-B),
and tighten with a Phillips screwdriver. Slider Brackets (D) should protrude
from the back of the keyboard tray assembly.
STEP 4
Assemble Clamps (E) to the Slider Brackets (D) using M4x7mm Flat Head Screws
(S-A). Tighten with a Phillips screwdriver.
STEP 5
Place Pads (F) on the underside of each Clamp (E). Place assembled keyboard
mount on the edge of the desktop and tighten Clamps (E).
STEP 6
Plug Keyboard Tray (A) into a 5V USB power supply. Follow the diagram below
for operation.
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
LAST UPDATED: 11/30/2022
REV1
Open Monday – Friday 7:00am – 7:00pm CST,
our dedicated support team can offer immediate assistance with rapid response
times. If any parts are received damaged or defective, please contact us. We
are happy to replace parts to ensure you have a fully functioning product.
309-278-5303
AVG. RESOLUTION TIME (within office hrs): 5M 4S
AVG. RESOLUTION TIME (within office hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
help@vivo-us.com
AVG. RESPONSE TIME (within office hrs): 1HR 8M
– 23% within < 15m
– 38% within < 30m
– 61% within < 1hr
– 83% within < 2hr
– 92% within < 3hr
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
References
- Register a .US.COM domain today!
- VIVO - Desks, Monitor Mounting, and More Home & Office Solutions – VIVO - desk solutions, screen mounting, and more
- Clamp-on Keyboard Tray with RGB Lights – VIVO - desk solutions, screen mounting, and more
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>