GE 22043LO Pre-Lit Christmas Trees Color Choice LED Technology Instruction Manual
- October 30, 2023
- GE
Table of Contents
GE 22043LO Pre-Lit Christmas Trees Color Choice LED Technology
Product Information:
The pre-lit Christmas tree from Nicolas Holiday Ltd. comes in a 5ft size and features a planter base for stability. The tree has two sections that are already electrically connected, and it comes with spare parts for replacement. The tree has 9 different light functions, including steady white, steady multi, SLO-GLO, white SLO-GLO, multi SLO-GLO, white flashing, multi flashing, change/twinkle flashing, and off. The control box is DC powered, and the product is for indoor use only with a voltage of 120V.
Product Usage Instructions:
-
Remove and unwrap all parts from the packaging. Keep the shipping carton for future storage.
-
Set the base in a clear area without any obstructions and on a flat surface.
-
Remove the red-colored plastic protective cap at the bottom of the pole and place the pole into the planter base.
-
Insert the top section into the bottom section, being careful to keep the cord from entering the opening and damaging the wires.
-
Shape the branches as shown in Fig. A. Start at the inner and stagger the tips. Move each tip up.
-
If one section of your tree does not illuminate, check that section for cut or damage wires or that all electrical connections
on the tree are made. If one section of your tree does not illuminate, check that section for loose or missing bulbs, all factory connections are properly made or that you properly made all the electrical connections between each tree section. -
Store your carton neatly in a cool, dry location protected from sunlight to prolong the tree life and to better keep the light sets in working order. Do not place a heavy load on the carton to avoid damage to or crushing the carton and tree inside.
-
Do not use or install any additional Christmas lighting or ornamentation that is powered by a light bulb socket. Doing this may result in damage to your Christmas tree or cause personal injury. Doing this will result in a void of the limited warranty of this product.
-
Disconnect the decorative item from the power source before performing any maintenance or cleaning.
Assembly Instructions
Nicolas Holiday Ltd. thanks you for purchasing this pre-lit Christmas tree.
Should you have any problems with your tree, visit us at
www.geholidaylighting.com for more information. You can call our toll free
number at 1-877-398-7337.
Check our website for latest service hours and assembly instruction videos
Assembly Instructions
Nicolas Holiday Ltd. thanks you for purchasing this pre-lit Christmas tree.
Should you have any problems with your tree, visit us at
www.geholidaylighting.com for more information. You can call our toll free
number at 1-877-398-7337.
Check our website for latest service hours and assembly instruction videos
TREE ASSEMBLY DIAGRAM
Note: Depending on the style of tree you purchased the top is already electrically connected to the bottom. Exercise care when handling so as to not damage the cord between the sections
- Remove and unwrap all parts. Keep the shipping carton for future storage. Set the base in a clear area without any obstructions and on a flat surface.
- Remove the red-colored plastic protective cap at the bottom of the pole and place the pole into the planter base.
- Insert the top section into the bottom section, as shown, being careful to keep the cord from entering the opening and damaging the wires.
- Shape branches as shown. Fig. A. Start at the inner and stagger the tips. Move each tip up 6to 40°. Fig. B. Make tips 2 & 3 to horizontial, tip 4 to vertical and tips 5 and 6 up to 45°.
IMPORTANT: Store your carton neatly in a cool, dry location protected from sunlight to prolong the tree life and to better keep the light sets in working order. Do not place a heavy load on the carton to avoid damage to or crushing the carton and tree inside.
Troubleshooting Tips
If one section of your tree does not illuminate, check that section for cut or damage wires or that all electrical connections on tree are made. If one section of your tree does not illuminate, check that section for loose or missing bulbs, all factory connections are properly made or that you properly made all the electrical connections between each tree section.
DISCLAIMER: DO NOT USE OR INSTALL ANY ADDITIONAL CHRISTMAS LIGHTING OR ORNAMENTATION THAT IS POWERED BY A LIGHT BULB SOCKET. DOING THIS MAY RESULT IN DAMAGE TO YOUR CHRISTMAS TREE OR CAUSE PERSONAL INJURY. DOING THIS, WILL RESULT IN A VOID OF THE LIMITED WARRANTY OF THIS PRODUCT.
Disconnect the decorative item from the power source before performing any maintenance or cleaning.
For indoor use only 120V
THIS IS NOT A TOY, FOR DECORATIVE USE ONLY. GE is a trademark of General
Electric Company and is under license by Nicolas Holiday Ltd.
Nicolas Holiday Ltd
02022 Nicolas Holiday Ltd.
9 F., No. 37, Guangfu North Rd.,
Taipei, Taiwan 10560
All rights reserved.
Printed in China
22043LO