VIVO V2236 Smartphone User Guide
- October 30, 2023
- Vivo
Table of Contents
VIVO V2236 Smartphone
Welcome to vivo
Please read this Quick Start Guide before using your phone, and keep it for
future reference.
This Quick Start Guide tells you how to set up your phone and use its key
features. For more detailed instructions, turn on your phone, then go to
Settings > About phone > Customer service Manual. You can also learn more
useful information on vivo’s official website.
For legal information, go to Settings > About phone > Legal information.
For the FCC ID of this phone, please go to Settings > About phone > Status.
The features and images shown in this guide are for reference only. They may
differ from the actual product.
It is recommended to charge the device for at least 30 minutes before turning
it on for the first time.
Optimum operating temperature is o·c to 35°C and optimum storage temperature
is -20°C to 45°C . Extreme heat or cold may damage your device or accessories.
The device IMEI can be obtained by dialing •#06#.
The use of the FM function does not incur additional costs to consumers.
Power button
When the phone is off, press and hold the Power button to tum it on. Press and
hold the button when the phone is on to tum the phone off or restart it.
IFT
Operation of this equipment is subject to the following two conditions:
- it is possible that this equipment or device may not cause harmful interference and
- this equipment or device must accept any interference, including interference that may cause undesired operation
FCC statement
This device complies with part 15 of the FCC Rules .Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Caution: Changes or modifications not expressly approved by the vivo
Mobile Communication Co.,Ltd. could void the user’s authority to operate the
equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, [ not installed and used in
accordance with the instructions, may cause hannful interference to
radio communications. However, there is no guarantee that interference will
not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be detennined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radiofTV technician for help.
FCC SAR
Head: 0.97 W/kg
Body-worn: 0.54 W/kg ( 15mm distance ) Hotspot: 0.71 W/kg ( 10mm distance )
Electrical Specifications
Adapter| Input| 100-240V- 50/60Hz
0.35A
---|---|---
Output| 5V=2A
Mobile phone| 3.89V
Product Standard Accessories
- Cell phone x 1
- Eject tool x 1
- Charger x 1
- Warranty card x 1
- USB cable x 1
- Quick start guide x 1
SAR statement
This device meets the government’s requirements for exposure to radio waves.
This device is designed and manufactured not to exceed the emission limits for
exposure to radio frequency (RF) energy set by the Federal Communications
Commission of the U.S. Government.
The SAR limit set by the FCC is 1.6W/kg. For body-worn operation, this device
has been tested and meets the FCC RF exposure guidelines for use with an
accessory that contains no metal and positions the device a minimum of 15mm
from the body. RF exposure compliance with any body-worn accessory that
contains metal was not tested and certified, and use of such body-worn
accessory should be avoided. Accessory available in market and must be used to
keep use distance 15mm from EUT to body-worn operation.
Tips:
Insert/remove your SIM card using the provided eject tool. To avoid damaging
the device, do NOT remove the back cover. This phone supports standard nano
SIM cards. If necessary, please go to your local operator shop for a standard
nano SIM card.
Parts
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>