FLOS Bellhop Wall Up Instructions
- June 10, 2024
- FLOS
Table of Contents
Bellhop Wall Up
Instructions
INSTRUCTION FOR CORRECT INSTALLATION AND USE
WARNING!
The safety of this fitting can only be guaranteed if these instructions are
observed, during both installation and use. Please retain these instructions
safety.
REMARKS:
-
When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
-
The appliance may in no way be modified or tampered with. Any modification may compromise safety and making the appliance itself dangerous.
FLOS declines all responsibility for products that are modified. -
The device carries no risk of photobiological emissions.
-
The light source cannot be replaced by the customer. Contact FLOS for information.
-
You can adjust the brightness of the appliance by using certain dimmers available on sale (please see the list of compatible dimmers that you will find under the “downloads” section of the appliance on the website www.flos.com).
-
The symbol shown on the device indicates that the product must be disposed of in a different manner than with the urban waste.
TECHNICAL DATA
17W LED.
CLEANING INSTRUCTIONS
- Use only a soft cloth to clean the appliance, dampened with water and soap or mild cleanser if needed for resistant dirt.
- Warning: do not use alcohol or other solvents.
Pic.3 EUR NOTE: Select and employ screw anchors which are suited to the surface where the appliance is to be installed.
EUR-USA-JP
Pic.3N PLEASE NOTE: to use the holes with a 60mm centre-to-centre distance, remove the two special perforated panels with a screwdriver or a similar tool. WARNING: this step will cause the appliance to lose its IP44 protection rating, which will be downgraded to IP20.
WHITE TO WHITE
References
- Decorative Modern Lighting for Contemporary Spaces | FLOS USA
- Decorative Modern Lighting for Contemporary Spaces | FLOS USA
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>