SONOFF SNZB-03 ZigBee Motion Sensor User Manual
- June 9, 2024
- SonOFF
Table of Contents
SONOFF SNZB-03 ZigBee Motion Sensor
The device can be operated intelligently via working with the SONOFF .ZigBee
Bridge to communicate with other devices
The device can work with other gateways supporting ZigBee 3.0 wireless
protocol. Detailed information is in accordance with the final product.
Operation instruction
-
Download APP
-
Pull out the battery insulation sheet
-
Add sub-devices
Connect the Bridge before adding the sub-device
Access eWeLink APP, select the Bridge that you want to connect, and tap “Add” hetto add a sub-device. Then long press reset button on the device for 5s until LED indicator flashes three times, which means the device has entered the .pairing mode, and be patient until pairing completes- If the addition failed, move the sub-device closer to the Bridge and try
Specifications
| Model | SNZB-03 |
|---|---|
| Battery model | (CR2450(3V |
| Wireless connection | (ZigBee (IEEE 802.15.4 |
| Working temperature | ℃40~℃10- |
| Working humidity | (10-90%RH (non-condensing |
| Material | PC |
| Dimension | 40x35x28mm |
Product Introduction
Features
SNZB-03 is a ZigBee low-energy motion sensor that can detect the you can movement of objects in real time. Connect it with the Bridge and .create a smart scene to trigger other devices
SONOFF ZigBee Bridge supports connecting multiple sub-devices at the same .time
Power the Bridge on, access the Bridge page in the eWeLink APP, and tap patient “Add”. Then set the sub-device to be paired to the pairing mode, and be .until the pairing completes
Delete sub-devices
Long press the reset button on the sub-device for 5s until the LED indicator
flashes three times. In this case, the sub-device is deleted from the Bridge
.successfully..Users can delete sub-devices directly from the sub-device page
on APP
Installation methods
- Placed on the desktop for use
- Tear off the protective film of the 3M adhesive and stick the device on .the desired area
- Do not install on the metal surface, otherwise it will affect the wireless .communication distance
- The device weight is less than 1 kg
- The insta llation height of less than 2 m is recommended