VIVO DESK-V000VL/D/N/O Desk Riser Instruction Manual
- October 30, 2023
- Vivo
Table of Contents
Desk Riser
Instruction Manual
SKU: DESK-V000VL/D/N/O
Scan the QR code with your mobile device or follow the link for helpful
videos and specifications related to this product. https://vivo-
us.com/products/desk-v000vl
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
help@vivo-us.com|
www.vivo-us.com
Chat live with an agent!|
309-278-5303
---|---|---
WARNING!
If you do not understand these directions, or if you have any doubts about the
safety of the installation, please call a qualified technician. Check
carefully to make sure there are no missing or defective parts. Improper
installation may cause damage or serious injury. Do not use this product for
any purpose that is not explicitly specified in this manual and do not exceed
weight capacity. We cannot be liable for damage or injury caused by improper
mounting, incorrect assembly, or inappropriate use.
WARNING: CHOKING HAZARD
SMALL PARTS – NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
PACKAGE CONTENTS
WARNING
PINCH POINT
DO NOT place hands on or near support bars. Moving path can crush and cut.
Pinch points are created during lifting and lowering the worksurface. Failure
to follow these instructions may result in serious personal injury.
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
TOOLS NEEDED
ASSEMBLY STEPS
STEP 1
Carefully remove the Desk Riser (A) from the packaging.
WARNING: Impact Hazard! Moving Parts can Crush and Cut!
STEP 2
Flip Desk Riser (A) upside down, then attach Feet Extensions (B) to the frame
using M5x10mm Screws (S-A).
STEP 3
Press the handles on each side and lift Desk Riser (A).
STEP 4
Mount Keyboard Brackets (C) to Keyboard Tray (D) using M5x10mm screws (S-A).
STEP 5
Hang assembled keyboard tray onto pre-installed knobs, and tighten knobs to
secure.
NOTE: Make sure the keyboard brackets are curving towards the user, not
towards the inside of the desk.
STEP 6
Place monitor, laptop and other items on desk surface.
STEP 7
Attach Cable Clip (S-B) to desk to manage keyboard and mouse cables.
STEP 8
Manage cables using Zip Ties (S-C).
STEP 9
If locks are not releasing properly to change desk height, adjust the position
of the black tube containing the steel release cable. Turn the nuts at the end
of the tube just behind the handle as shown, moving the tube away from the
handle until the cable once again has proper tension, then tighten the nuts.
CAUTION!
|
---|---
Keep monitor and laptop base fully on the desktop.| Follow the cable routing
instructions to avoid the potential to pinch cables.
| 
Leave enough slack in cable to allow for full range of vertical motion (15” /
38 cm).| Raise desktop slowly to keep items stable.
Failure to follow these instructions may result in property damage and/or personal injury.
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
LAST UPDATED: 01/19/2023
REV1
Open Monday – Friday 7:00am – 7:00pm CST, our dedicated support team can offer immediate assistance with rapid response times. If any parts are received damaged or defective, please contact us. We are happy to replace parts to ensure you have a fully functioning product.
| 309-278-5303 | AVG. RESOLUTION TIME (within office hrs): 5M 4S |
|---|
www.vivo-us.com
Chat live with an agent!| AVG. RESOLUTION TIME (within office hrs): < 15 M
help@vivo-us.com| AVG. RESPONSE TIME (within office
hrs): 1HR 8M
– 23% within < 15m
– 38% within < 30m
– 61% within < 1hr
– 83% within < 2hr
– 92% within < 3hr
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
References
- Register a .US.COM domain today!
- VIVO - Desks, Monitor Mounting, and More Home & Office Solutions – VIVO - desk solutions, screen mounting, and more
- 42" Standing Desk Converter – VIVO - desk solutions, screen mounting, and more
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>