BLUE SEA SYSTEMS PN 1732 Mini OLED DC Ammeter Instructions
- October 30, 2023
- BLUE SEA SYSTEMS
Table of Contents
PN 1732 Mini OLED DC Ammeter
Product Information
The Mini OLED DC Ammeter, PN 1732, is a device that monitors the DC current and displays it on a bright, waterproof, daylight-readable OLED screen. It has a nominal voltage of 12V/24V DC and a voltage range of maximum operating current 15mA. The device has a resolution of 0.1A and an accuracy of +/- 2%. The cutout dimensions are 1-1/8 (29mm) diameter. The package includes one shunt (1x 9230) with an intermittent rating of 5 min at 110A and cranking rating of 30 sec at 175A.
Features:
- Monitors DC current
- Bright, waterproof, daylight-readable OLED screen
- Nominal voltage of 12V/24V DC
- Voltage range of maximum operating current 15mA
- Resolution of 0.1A
- Accuracy of +/- 2%
- Cutout dimensions of 1-1/8 (29mm) diameter
- Shunt (1x 9230) with intermittent rating of 5 min at 110A and cranking rating of 30 sec at 175A included
Specifications:
- E-marked meter face
- IP66 protection against powerful water jets
- Add 1A fuses in A and B wires when the shunt is installed on the + side of a battery
Regulatory:
- ABYC certified marine electrical professional for system design and circuit protection consultation recommended
Product Usage Instructions
Follow the below instructions for proper usage of the Mini OLED DC Ammeter:
- Ensure that the device is connected to a 12V/24V DC power source.
- Install the device in a cutout with a diameter of 1-1/8 (29mm).
- Install the shunt (1x 9230) with intermittent rating of 5 min at 110A and cranking rating of 30 sec at 175A on the + side of the battery and add 1A fuses in A and B wires.
- Turn on the device and monitor the DC current on the OLED screen.
- Consult an ABYC certified marine electrical professional for system design and circuit protection.
Mini OLED DC Ammeter PN 1732
Monitors DC current on a bright, waterproof, daylight readable OLED screen.
Features
- Measures current on the positive or negative side
- Compact size
- Reverse polarity protected
- Mounts in a comon 1-1/8 inch hole
Specifications
- Nominal Voltage 12V / 24V DC
- Voltage Range 8V–36V DC
- Maximum Operating Current 15mA
- Resolution 0.1A
- Accuracy +/- 2%
- Cutout Dimensions 1-1/8″ (29mm) diameter
- Shunt (included) 1x 9230 (100A/50mV)
- Intermittent: 5 min. 110A
- Cranking: 30 sec. 175A
Regulatory
E marked
Meter face is IP66 – protected against powerful water jets
Monitor Outboard Alternator
Verify cranking ratings
Monitor Inboard Alternator
Monitor House Loads
Monitor System Amperage
Verify cranking ratings
LEGEND
-
Positive ___
-
Negative ————–
-
See circuitwizard.bluesea.com to determine fuse rating.
NOTE: The diagrams are intended for reference only. Consult an ABYC certified marine electrical professional for system design and circuit protection.
980022970 Rev. 008
4600 Ryzex Way Bellingham, WA 98226 USA p 360.738.8230
www.bluesea.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>