Lepro EAN150006-DW-EU LED Ceiling Light User Guide

June 14, 2024
Lepro

Lepro EAN150006-DW-EU LED Ceiling Light

Parts

Screws for concrete and stone ceiling

Concrete anchors

Sealing Washers

INSTALLATION

Lepro-EAN150006-DW-EU-LED-Ceiling-Light-fig-5

Lepro-EAN150006-DW-EU-LED-Ceiling-Light-fig-6

Lepro-EAN150006-DW-EU-LED-Ceiling-Light-fig-7

Lepro-EAN150006-DW-EU-LED-Ceiling-Light-fig-1

INSTRUCTION

  1. SLR 2019/2020 Non-replaceable light source. EN60598-1 Replaceable (LED only) light source by a professional. The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similar qualified person.
  2. Non-replaceable control gear.
  3. Caution, risk of electric shock.
  4. All electrical connections must be made by a qualified person.
  5. For indoor use only.
  6. This product is not dimmable.
  7. This product is subject to the provisions of European Directive 2012/19/EC. The symbol showing a wheelie bin crossed through indicates that the product requires separate refuse collection in the European Union. This applies to the product and all accessories marked with this symbol. Products identified with this symbol may not be discarded with normal household waste, but mustbe taken to a collection point for recycling electric and electronic appliances. This recycling symbol marks e.g. an object or parts of the material as valuable for recycling. Recycling helps to reduce the consumption of raw materials and protect the environment

Notes & Precautions

  • This product is class I and must be earthed.
  • Please switch off mains supply before installation.
  • Ensure all seals are intact and operational after installation or maintenance.
  • Do not touch the light while in use or just after use to avoid being burnt.
  • This product contains a light source of energy efficiency class .
  • This is a containing product, including one light source.
  • Connect the cable according to the signs on the product. Use a cable that meets safety regulations.
  • Do not install on unstable, uneven or high-temperature surfaces or in corrosive environments.
  • If the external flexible cable or cord of this luminaire is damaged,it shall be exclusively replaced by the manufacturer or his service agent or a similar qualified person in order to avoid a hazard.
  • Luminaires not suitable for covering with thermally insulating material.
  • Where breakage or damage to lamps occurs the chain must not be used/energized but disposed of safely.

Manufacturer

UK Importer

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Lepro User Manuals

Related Manuals