WaveLinx WTE PRO Tilemount Sensor Kit Owner’s Manual

June 16, 2024
WaveLinx

WaveLinx WTE PRO Tilemount Sensor Kit

Overview

The WaveLinx PRO Tilemount Sensor Kit is an integral part of the WaveLinx connected lighting (WCL) system and offers 120-277VAC 3 amp zero crossing relay control and continuous 0-10V dimming control of LED and non-LED loads. The intended use of the Tilemount Sensor Kit is to provide daylight dimming and control for connected downlight luminaires or other luminaires that do not support the WaveLinx PRO integrated sensor.
The Tilemount Sensor Kit is powered by the 120-277VAC circuit it is controlling and allows simple electrical junction box mounting via ½” knock out or direct connection to the junction box attached to the connected luminaire. The WaveLinx PRO Tilemount Sensor Kit operates on a wireless mesh network based on IEEE 802.15.4 standards and is controlled by the WaveLinx Area Controller.

Product Features & Benefits

  • External plenum-rated power source for multiple sensor connectivity (up to 16 sensors)
  • Multiple pre-terminated plenum-rated cable options are available
  • Mounting heights of 8 to 15ft (2.4 to 4.5m)
  • Provides passive infrared (PIR) motion coverage up to 500 sqft (46m2)
  • Sensor installs into 1/2 – 3/4” (12 – 19mm) ceilings or octagonal junction boxes
  • Hardware capable of Real-Time Location Services (RTLS) – WaveLinx CORE Locate license required

WaveLinx
PRO Tilemount Sensor Kit without control module (WTE)

  • Provides motion sensing, daylight dimming, and additional RTLS sensing capabilities outside of fixture-integrated components

Typical Applications

  • Office
  • Education
  • Healthcare
  • Hospitality
  • Retail Industrial
  • Manufacturing

WaveLinx-WTE-PRO-Tilemount-Sensor-Kit-FIG-14

Product Certification

  • Meets latest ASHRAE Standard 90.1 requirements
  • Meets the latest IECC requirements
  • Meets latest CEC Title 24 requirements

Product Features

WaveLinx-WTE-PRO-Tilemount-Sensor-Kit-FIG-2

Compatibility

Product Features & Benefits

  • External plenum-rated power source for multiple sensor connectivity (up to 16 sensors)
  • Multiple pre-terminated plenum-rated cable options are available
  • Mounting heights of 8 to 15ft (2.4 to 4.5m)
  • Provides passive infrared (PIR) motion coverage up to 500 sqft (46m2)
  • Sensor installs into 1/2 – 3/4” (12 – 19mm) ceilings or octagonal junction boxes
  • Hardware capable of Real-Time Location Services (RTLS) – WaveLinx CORE Locate license required

Order Information

  • The WaveLinx PRO Tilemount Sensor kit and Power Supply are accessories to the WaveLinx connected lighting (WCL) system and require a WaveLinx Area Controller (WAC) for full functionality.
  • The wireless tile mount sensor kit is used to provide occupancy sensing in spaces and can be mapped to other sensors in an area for maximum coverage and control.
  • The wireless tile mount sensor kit is typically used to provide additional Real Time Location (RTLS) sensing points in space (WaveLinx CORE Locate license required) in addition to PIR motion sensing.

WaveLinx-WTE-PRO-Tilemount-Sensor-Kit-FIG-15

Catalog Number Description
WTE Wavelinx PRO Tilemount Sensor Kit without Control Module
WLX-PS-SENSOR Wavelinx PRO Tilemount Sensor Power Supply
WLX-CABLE-054 Wavelinx PRO Sensor Cable 54in
WLX-CABLE-084 Wavelinx PRO Sensor Cable 84in
WLX-CABLE-180 Wavelinx PRO Sensor Cable 180in
WLX-CABLE-360 Wavelinx PRO Sensor Cable 360in
WLX-CABLE- SPL Wavelinx PRO Sensor Cable Splitter
WLX-CABLE- CPL Wavelinx PRO Sensor Cable Coupler

Required Accessories

  • All WaveLinx connected lighting (WCL) system accessories require at least one WaveLinx Area Controller (WAC) for communications.
  • Ensure the bill of material includes one of the following components.

Catalog Number Description
WAC2- POE WaveLinx Area Controller G2, PoE-powered
WAC2- 120 WaveLinx Area Controller G2 with 120VAC to PoE Injector

Optional Accessories
For connection to 120VAC outlets.

Catalog Number Description
WPOE2- 120 120VAC to PoE Injector

Product Specifications

Key Features
Kit Contents:

  • Sensor
  • 54” Plenum-rated cable
  • Tile and 4” octagon mounting trim
  • Easily enable 0-10V luminaires to be controlled by WaveLinx
  • Provides closed-loop daylighting control of non-integrated luminaires
  • Control module mounting to a junction box or luminaire driver compartment
  • Sensor installs into 1/2 – 3/4” (12 – 19mm) ceilings or octagonal junction boxes
  • Ceiling white trims that can be painted for a custom appearance
  • Mounting heights of 8 to 15ft (2.4 to 4.5m)
  • Provides passive infrared (PIR) motion coverage up to 500 sqft (46m2)
  • Hardware capable of Real-Time Location Services (RTLS) CORE Locate license required
  • Energy calculations available through WaveLinx CORE

Mechanical

  • Tilemount Sensor Size: 2.8” x 2.8” x 1.2” (70mm x 70mm x 31mm)
  • J-Box Sensor Size: 4.1” x 4.1” x 1.0” (105mm x 105mm x 24mm)
  • Environment:
    • Operating temperature: -4°F to 131°F (-20°C to 55°C)
    • Storage temperature: -40°F to 158°F (-40°C to 70°C)
    • Relative humidity operating: 5% to 95% non-condensing
    • For indoor use only
  • Mounting Height: 8-15ft (2.4 to 4.5m)
  • Ceiling hole diameter: 2.9” (73mm)
  • Ceiling thickness: 0.5 to 0.75” (12 – 19mm) drop ceiling thickness
  • Color: Matte white (field paintable trim)
  • Housing: UV-stabilized plastic

Electrical

  • 120/277VAC incoming and switched power
  • 10mA 0-10V sink (refer to driver specifications to calculate quantity supported)
  • 3A LED loads

Software Specifications

  • Any number of sensors can be mapped to any number of zones
  • Remote configuration of occupancy sensing and closed-loop daylighting

Wireless Specifications

  • Radio: 2.4GHz
  • Standard: IEEE 802.15.4
  • Transmitter Power: + 7dBm
  • Range: 75ft (25m) LOS
  • # of Walls: 2 interior walls standard construction

**Standards/Ratings***

  • cULus Listed
  • Meets latest ASHRAE Standard 90.1 requirements
  • Meets the latest IECC requirements
  • Meets latest CEC Title 24 requirements
  • Environmental Regulations:
  • RoHS Directive 2011/65/EU

Warranty

  • Five-year warranty standard

Dimensional Details

WaveLinx-WTE-PRO-Tilemount-Sensor-Kit-FIG-4

Mounting Height

Wiring Diagrams

Notes

  • Two (2) output jacks per power supply (two strings)
  • MAX of eight (8) Tilemount Sensors on EACH string
  • MAX total cable run per string of 250ft (76m)

WaveLinx-WTE-PRO-Tilemount-Sensor-Kit-FIG-6

Tilemount Installation

Step 1
Cut 2-7/8” (73mm) to 3” (76mm) diameter hole in the ceiling tile.
Step 2
Connect plenum cable connectors.
Step 3
Snap sensor body into ceiling trim.
Step 4
Squeeze trim springs and insert them through the hole.

WaveLinx-WTE-PRO-Tilemount-Sensor-Kit-FIG-7

J-Box Installation

Step 1
Snap the sensor body into the cover plate.
Step 2
Pull plenum sensor cable through junction box knockout.
Step 3
Connect plenum cable connectors.
Step 4
Secure the sensor kit to the junction box.

WaveLinx-WTE-PRO-Tilemount-Sensor-Kit-FIG-8

Additional Dimensional Details – Tilemount Sensor

WaveLinx-WTE-PRO-Tilemount-Sensor-Kit-FIG-9

Additional Dimensional Details – J-Box Sensor

WaveLinx-WTE-PRO-Tilemount-Sensor-Kit-FIG-10

Field of View

TOP VIEW

WaveLinx-WTE-PRO-Tilemount-Sensor-Kit-FIG-11

Notes

  1. The coverage pattern shown above depicts the area below the luminaire where the integrated sensor system can detect occupancy.
  2. Spacing between fixtures should not exceed the coverage pattern of the sensor.
  3. Mounting height should not exceed the coverage shown.
  4. Exceeding these spacing/height guidelines will result in reduced integrated sensor performance.

SIDE VIEW

WaveLinx-WTE-PRO-Tilemount-Sensor-Kit-FIG-12

System Diagram

  • This diagram shows the main components of the WaveLinx connected lighting system with CAT and PRO devices.
  • The PRO devices communicate using wireless mesh technology based on the IEEE 802.15.4 standard. A PoE LAN connection for each WaveLinx Area Controller (WAC) is required for power and data access to the building lighting network.
  • The CAT devices communicate over the category 5-based communication bus and control the light fixtures using a relay (on/off) and 0-10V output (dim/raise).
  • WaveLinx Area Controllers (WAC) communicate with WaveLinx CORE Apps over the Ethernet network.

View
WaveLinx Network and IT Guidance Technical Guide

WaveLinx-WTE-PRO-Tilemount-Sensor-Kit-FIG-13

CONTACT

Cooper Lighting Solutions

© 2023 Cooper Lighting Solutions All Rights Reserved.
Specifications and dimensions are subject to change without notice.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals