ITL intelligence ITL-F304C Remote Control Instructions
- June 16, 2024
- ITL intelligence
Table of Contents
ITL‐F304C Remote control operation instruction
ITL-F304C Remote Control
As shown in the figure:
- button: to turn light ON or OFF.
- 1 button: for fan LOW speed.
- Obutton: to turn fan OFF.
- 2 button: for fan MEDIUM speed.
- 3 button: for fan HIGH speed.
- REDLED: Indicator light: When pressing the button, this light will light up and the remote control will send instructions.
Restore electrical power.Within 30 seconds of restoring electrical power,
press and hold the “0” button on the remote controtransmitterfor Sseconds or
until ight on the fan blinkstwiceUsethe remote control transmitter to test the
liaht and fan functions to confirm the learning process is complete.
Tap button quickly to turn lights off or on. Hold button down to increase or
decrease or decrease lights. If you press button in excess of 0.7seconds, it
becomes a dimmer. The lights vary cyclically in 8 seconds. The light button
has an auto resume function, which keeps the light at the same brightness as
the last time it was turned off.
FCC Radiation Exposure Statement: The device has been evaluated to meet
general RF exposure requirement. The device can be used in portable exposure
condition without restriction. This device complies with Part 15 of the FCC
rules. Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.