ACTIVE VPC-3 Vent Pipe Cap Installation Guide
- October 30, 2023
- ACTIVE
Table of Contents
Installation Instructions
Vent Pipe Cap Model: VPC-3 Diameter: 3″
VPC-3 Vent Pipe Cap
Flashing Detail & Instructions
- Slide the Vent Pipe Cap over the existing pipe.
- Observe the screws located on top of the vent. Use this as a pattern to attach the vent to the pipe.
- To secure the vent, attach the vent to the pipe using a #8 self-tapping sheet metal screw.
- Total number of screws needed = 3
- Recommended installation screw: #8 x 1/2″ Sheet Metal Screw
- Screws not included.
- All Aluminum Construction, Thickness = 0.025″ [0.635 mm]
Active Ventilation Products, Inc.
Website: roofvents.com Email:
sales@roofvents.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>