spiniock Sprayhood275N Spray Hood Instructions

spiniock Sprayhood275N Spray Hood Instructions

Product Information

Specifications:

• Product Name: Sprayhood
• Compatible with : Deckvest Cento, Deckvest Lite pre-2017, Deckvest Lite + / Lite 2017 > 5D and 6D 170N / 275N DURO / SOLAS, Deckvest Vito
• Manufacturer : YKK

Product Usage Instructions

Deckvest Cento:

1. Thread the adapter through the buckle.
2. Attach the sprayhood buckle in front of the bladder.

Deckvest Lite pre 2017:

1. Attach the sprayhood buckle in front of the bladder.
2. Allow 70mm of webbing from the buckle to the sprayhood.
3. Thread the buckle onto the webbing.
4. Clip the buckle on the sprayhood into the buckle on Deckvest.

Deckvest Lite + / Lite 2017 > 5D and 6D 170N / 275N DURO / SOLAS:

1. Thread the webbing through the buckle.
2. Allow 70mm of webbing from the buckle to the sprayhood.
3. Thread the webbing back over through the buckle.

Deckvest Vito:

1. Take the sprayhood and pass the two grey webbing pieces into the holes on top of the bladder.
2. Pass the toggle on the bladder through the center hole in the sprayhood.
3. Take the sprayhood lanyard and pass the toggle through the front center hole in the sprayhood.

Sprayhood Repacking

1. Place the jacket on its back and lay the sprayhood out.
2. Concertina the top of the sprayhood.
3. Turn the jacket over on its front and start to bend the hoop section in on itself.
4. Push down the bent hoop section into the back of the jacket.
5. Push the sprayhood hoop down into the pocket.

What is the purpose of a sprayhood?
A spray hood is designed to provide additional protection from spray and water splashes while using the Deckvest.

Can I use a sprayhood with any Deckvest model?
No, please refer to the specific instructions for each Deckvest model to ensure compatibility with a sprayhood.

How should I repack the sprayhood?
Follow the provided instructions to properly repack the spray hood into the back pocket of the jacket.

Sprayhood attachment points on Deckvest

Note : Sprayhoods are fitted in front of the bladder

Deckvest Cento

1. Thread adapter through buckle
2. Then back over through the buckle

Note : Allow 70mm of webbing from buckle to sprayhood

Deckvest Lite pre 2017

1. Thread buckle onto webbing
2. Clip buckle on sprayhood into the buckle on Deckvest

Deckvest Lite + / Lite 2017 > 5D and 6D 170N / 275N DURO / SOLAS

1. Thread Webbing through the buckle
2. Then back over through the buckle

Sprayhood Fitting Instructions

Deckvest Vito

1. Take sprayhood and pass the two grey webbing pieces into holes on top of the bladder
2. Pass the toggle on the bladder through the centre hole in Sprayood
3. Take the Sprayhood lanyard and pass the toggle through the front center hole in Sprayhood.

Sprayhood Repacking

1. Place jacket on its back and lay sprayhood out
2. Concertina top of sprayhood
3. Turn the jacket over on its front and start to bend the hoop section in on itself and push it down into the back of the jacket
4. Push the sprayhood hoop down into the pocket

FAQ’s

What is the purpose of a sprayhood?

A spray hood is designed to provide additional protection from spray and water splashes while using the Deckvest.

Can I use a sprayhood with any Deckvest model?

No, please refer to the specific instructions for each Deckvest model to ensure compatibility with a spray hood.

How should I repack the sprayhood?

Follow the provided instructions to properly repack the spray hood into the back pocket of the jacket.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>