Active Ventilation VPC-9-BL Aluminum Vent Pipe Cap Instruction Manual
- October 30, 2023
- Active Ventilation
Table of Contents
Active Ventilation VPC-9-BL Aluminum Vent Pipe Cap
Product Information
The Active Ventilation Products, Inc. Vent Pipe Cap Model VPC-9 is a product designed to cover existing pipes to prevent rain and snow from entering. The vent pipe cap has a diameter of 9 inches and is made of all aluminum construction with a thickness of 0.025 inches (0.635 mm). The product comes with a flashing detail andinstructions for easy installation.
Product Usage Instructions
- Slide the Vent Pipe Cap over the existing pipe.
- Observe the screws located on top of the vent. Use this as a pattern to attach the vent to the pipe.
- To secure the vent, attach the vent to the pipe using a #8 self-tapping sheet metal screw.
- The recommended installation screw is #8 x 1/2 Sheet Metal Screw.
- A total of three screws are needed to secure the vent.
- Note that screws are not included in the package.
DIMENSION
Installation Instructions
- Vent Pipe Cap Model: VPC-9 Diameter: 9″
Flashing Detail & Instructions
- Slide the Vent Pipe Cap over the existing pipe.
- Observe the screws located on top of the vent. Use this as a pattern to attach the vent to the pipe.
- To secure the vent, attach the vent to the pipe using a #8 self-tapping sheet metal screw.
- Total number of screws needed = 3
- Recommended installation screw: #8 x 1/2″ Sheet Metal Screw
- Screws not included.
All Aluminum Construction, Thickness = 0.025″ [0.635 mm]
CONTACT
- Website: roofvents.com
- Email: sales@roofvents.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>