Active Ventilation VPC-6-WT Vent Pipe Cap Instruction Manual
- October 30, 2023
- Active Ventilation
Table of Contents
Active Ventilation VPC-6-WT Vent Pipe Cap
Product Information
The Active Ventilation Products Vent Pipe Cap Model VPC-6 is a all-aluminum cap designed to fit over an existing 6-inch diameter vent pipe. The cap is constructed with a thickness of 0.025 inches (0.635 mm) and features screws on top for easy attachment to the pipe. The product is manufactured by Active Ventilation Products, Inc., a company that specializes in roof ventilation solutions.
Product Usage Instructions
- Slide the Vent Pipe Cap over the existing vent pipe.
- Observe the screws located on top of the cap and use them as a pattern to attach the cap to the pipe.
- To secure the cap, attach it to the pipe using a #8 self-tapping sheet metal screw.
- A total of three screws are needed for installation.
- The recommended installation screw is a #8 x 1/2 Sheet Metal Screw.
- Note that screws are not included with the product.
Dimension
Installation Instructions
- Vent Pipe Cap Model: VPC-6 Diameter: 6″
Flashing Detail & Instructions
- Slide the Vent Pipe Cap over the existing pipe.
- Observe the screws located on top of the vent. Use this as a pattern to attach the vent to the pipe.
- To secure the vent, attach the vent to the pipe using a #8 self-tapping sheet metal screw.
- Total number of screws needed = 3
- Recommended installation screw: #8 x 1/2″ Sheet Metal Screw
- Screws not included.
All Aluminum Construction, Thickness = 0.025″ [0.635 mm]
CONTACT
Website: roofvents.com ”
Email: sales@roofvents.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>