Active Ventilation Products RC-4-H12 Aluminum Roof Curb Instruction Manual
- October 30, 2023
- Active Ventilation Products
Table of Contents
Active Ventilation Products RC-4-H12 Aluminum Roof Curb
Product Information
The product is a roof curb model RC-4-H12 manufactured by Active Ventilation Products, Inc. It has an inside opening of 6 inches, and outside length and width of 7 inches, and a height of 12 inches. The product is designed to be used for exhaust or intake ventilation and comes with a curb mount flange, roof curb, and roof vent. The product also includes screws for membrane insulation.
Product Usage Instructions
- Cut a round hole 6 inches in diameter in the roof deck where you want to install the roof curb.
- Take 8 screws for the flange installation.
- Use recommended installation screw: #10 x 1 1/2 Sheet Metal Screw.
- Flash the roof curb onto the deck according to the specifications of the membrane manufacturer.
- Note that screws are not included in the package.
For any further queries or assistance, please visit the Active Ventilation Products, Inc. website or email their sales team at sales@roofvents.com.
Overview
Top View
Angled View
- Aluminum Alloy 3003-H14
- Thickness = 0.025″ ± 0.005
- Tolerance = ± .25 ( 1/4″ )
Roof Curb Flashing Detail
Roof Curb Installation Instructions
- Cut a round hole 6″ in diameter in the roof deck.
- Total number of screws needed for flange = 8
- Recommended installation screw: #10 x 1 1/2″ Sheet Metal Screw
- Flash roof curb onto deck according to specifications of the membrane manufacturer.
- Screws not included.
Dimension
Roof Curb Model: RC-4-H12
- Inside Opening: 6″
- Outside Length & Width: 7″
- Height: 12″
Active Ventilation Products, Inc.
- Website: roofvents.com.
- Email: sales@roofvents.com.
References
- Roof Vents, Solar Attic Fans, Gravity Vents, Static Vents, Vent Caps
- Roof Vents, Solar Attic Fans, Gravity Vents, Static Vents, Vent Caps
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>