Active Ventilation Products RC-3-H12 Aluminum Roof Curb Instruction Manual
- October 30, 2023
- Active Ventilation Products
Table of Contents
RC-3-H12 Aluminum Roof Curb
Product Information
The product is a Roof Curb Model: RC-3-H12 manufactured by Active Ventilation Products, Inc. It has an inside opening of 5 inches, outside length & width of 6 inches and a height of 12 inches. The product is designed for use as an exhaust or intake vent for roofing systems.
Product Usage Instructions
Follow the below instructions to install the Roof Curb:
- Cut a round hole 5 inches in diameter in the roof deck.
- Place the Roof Curb over the hole in the deck.
- Attach the Roof Curb to the deck using #10 x 1 1/2 Sheet Metal Screws. The total number of screws needed for the flange is 8.
- Flash the roof curb onto the deck according to the specifications of the membrane manufacturer.
- The screws required for installation are not included with the product and must be purchased separately.
Note: Ensure that all installation work is carried out by a qualified professional following all relevant safety regulations and guidelines.
Top View
Roof Curb Flashing Detail
- Aluminum Alloy 3003-H14
- Thickness = 0.025″ ± 0.005
- Tolerance = ± .25 ( 14″ )
Roof Curb Installation Instructions
- Cut a round hole 5″ in diameter in the roof deck.
- Total number of screws needed for flange = 8
- Recommended installation screw: #10 x 1 1/2″ Sheet Metal Screw
- Flash roof curb onto deck according to specifications of the membrane manufacturer.
- Screws not included.
Roof Curb Model: RC-3-H12
Inside Opening: 5″, Outside Length & Width: 6″, Height: 12″
Active Ventilation Products, Inc.
Website: roofvents.com
Email: sales@roofvents.com
References
- Roof Vents, Solar Attic Fans, Gravity Vents, Static Vents, Vent Caps
- Roof Vents, Solar Attic Fans, Gravity Vents, Static Vents, Vent Caps
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>