Active Ventilation Products RC-24-H6 Aluminum Roof Curb User Manual
- October 30, 2023
- Active Ventilation Products
Table of Contents
Active Ventilation Products RC-24-H6 Aluminum Roof Curb
Product Information
The product is a Roof Curb Model: RC-24-H6 from Active Ventilation Products, Inc. It has an inside opening of 25 inches and outside length & width of 27 inches, with a height of 6 inches. The product features screws, a hypotenuse of 38, a roof curb flashing detail, curb mount flange, exhaust or intake, membrane insulation, duct from below, and wood nailer roof deck.
Product Usage Instructions
To install the roof curb, follow the below instructions:
- Cut a square or round hole 25 in diameter in the roof deck.
- Use a total of 20 screws for the flange.
- Recommended installation screw is #10 x 1 1/2 Sheet Metal Screw.
- Flash roof curb onto deck according to specifications of the membrane manufacturer.
- Note that screws are not included with the product.
Top View
Angled View
- Aluminum Alloy 3003-H14
- Thickness = 0.040″ ± 0.005
- Tolerance = ± .25 ( 1 4″ )
Roof Curb Flashing Detail
Roof Curb Installation Instructions
- Cut a square or round hole 25″ in diameter in the roof deck.
- Total number of screws needed for flange = 20
- Recommended installation screw: #10 x 1 1/2″ Sheet Metal Screw
- Flash roof curb onto deck according to specifications of the membrane manufacturer.
- Screws not included.
Roof Curb Model: RC-24-H6
- Inside Opening : 25″
- Outside Length & Width: 27″
- Height : 6″
Active Ventilation Products, Inc.
- Website : roofvents.com
- Email : [email protected]
References
- Roof Vents, Solar Attic Fans, Gravity Vents, Static Vents, Vent Caps
- Roof Vents, Solar Attic Fans, Gravity Vents, Static Vents, Vent Caps
Read User Manual Online (PDF format)
Loading......