VEVOR HC43-2000T Pallet Fork User Manual
- October 30, 2023
- VEVOR
Table of Contents
PALLET FORK
USER MANUAL
HC43-2000T Pallet Fork
We continue to be committed to provide you tools with competitive price.
“Save Half”, “Half Price” or any other similar expressions used by us only
represents an estimate of savings you might benefit from buying certain tools
with us compared to the major top brands and doses not necessarily mean to
cover all categories of tools offered by us. You are kindly reminded to verify
carefully when you are placing an order with us if you are actually saving
half in comparison with the top major brands.
MODEL:HC43-2000T,HC60-2000T,HC60-4000T
NEED HELP? CONTACT US!
Have product questions? Need technical support? Please feel free to contact
us:
CustomerService@vevor.com
This is the original instruction, please read all manual instructions
carefully before operating. VEVOR reserves a clear interpretation of our user
manual. The appearance of the product shall be subject to the product you
received. Please forgive us that we won’t inform you again if there are any
technology or software updates on our product.
SAFETY INSTRUCTIONS
WARNING:
- Read this material before using this product. Failure to do so can result in serious injury.
- Do not exceed working capacity for pallet fork.
- Be sure the Pallet Forks are full installed, screw rods are in proper working order and clamped tightly to the bucket.
- Before lifting, please check the load’s weight ,never exceed the maximum lift capacity of the forks or the machine.
- Lower the pallet forks completely to the ground prior to dismounting from the machine. Understand and comply with the manufacturer’s recommendations for dismounting and parking your machine.
- Always evenly load and secure pallet forks in such a way that they will not shift, tilt or fall.
- After use, please dry before storage to avoid rusting of product.
- Procedures not specifically explained in this manual must be performed only by a qualified technician.
To prevent serious injury from tool failure,do not use when it is damaged:
-
Please check the overall condition of the product before each use.
Is the screw thread damaged?
Is the fork deformed?
Is the weld cracked?
Whether there are cracks in all parts.
Before each use, check whether the pallet fork works properly before actual use. If the pallet fork doesn’t work properly, please follow the inspection instructions to see if the problem occurs. -
To prevent serious injury,be careful when troubleshooting the faulty pallet fork , solve all problems before use. If the solution provided in thetroubleshooting guide cannot be solve the problem, please ask qualified technicians to check the pallet fork before use.
-
Make sure that the pallet fork is safe enough to continue to use it.
Wish that the pallet fork can bring you convenience at work.
CAUTION:
Carefully read instructions and procedures for safe operations.
Save This Manual
MODEL AND PARAMETERS
Model⇒
SPEC.⇓| **HC43-2000T| ****HC60-2000T| HC60-4000T
---|---|---|---
Material| Carbon Steel| Carbon Steel| Carbon Steel
** Surface Treatment| black powder-coat finish| black powder-
coat finish| black powder-coat finish
Working Capacity| 2000lbs| 2000lbs| 4000lbs
Fork Size(LW)| 767cm| 1097cm| 10910cm
Stabilizer Bar Adjustment Range| 49.5~91.5cm| ****
49.5~91.5cm| **** 49.5~91.5cm
*** Screw Rod| M16140mm Grade 8.8| M16140mm Grade 8.8| M16140mm Grade 8.8
COMPONENTS
Model⇒
Parts.⇓| **HC43-2000T| ****HC60-2000T| HC60-4000T
---|---|---|---
** Pallet fork| ×2| ×2| ×2
Clamping Plate| /| ×2| ×2
Stabilizer Bar| ×2| ×2| ×2
User Manual| ×1| ×1| **** ×1
STRUCTURE DIAGRAM
- Screw Rod
- hole
- Stabilizer Bar
- Fork
- Clamping Plate
INSTRUCTIONS
Notice:
-
Do not use pallet forks for digging, pushing or pulling objects.
-
2.It is recommended that all objects be secured and lifted on pallets.
Unsecured loads can cause damage to the forks or bucket. -
Be sure that loads are evenly distributed and centered.Lifting loads that are unevenly distributed can cause damage to the forks or bucket.
-
Keep load slightly tilted back to distribute weight towards the base of the forks.
-
Do not lift loads that exceed the height of the bucket.
Step 1. Slide the fork into the edge of the bucket.
Step 2. twist the screw rod and clamp it down to lock.
Step 3. Assemble the two parts of the stabilizer bar, and then put it on the forks, tighten the bolts.
Step 4. According to the actual conditions,the iron chain can be passed through the two holes to strengthen the fixation and to increase the bearing capacity.
Note:
Chain Holes Design for Heavy Lifting
You can use chains to secure loads and to act as a stabilizer for heavy
equipment or the larger load that you are moving.
Ensure you will get a secure lift, even when dealing with heavy objects,
provide higher work efficiency and safety for your clamp on pallet forks
Step 5. Usage caution: please put the loads behind the pallet so as not
to damage the bucket and fork.
Transport and placement
- Keep the forks low, just a few inches from the ground is best.
- Be aware of everything around you. Avoid obstructions and always give pedestrians the right of way.
- Drive at a safe speed at all times. Take it easy around corners and avoid quick stops.
- Travel in reverse if the load obstructs your view.
- Avoid adjusting the height of a load while in motion.
- Always be aware of changes in terrain. When working on inclines, declines, or on a hill-side, do not raise the load too high.
- Slowly move load into position.
- Make sure load is square and straight.
- Stop the movement completely when placing a load.
- Be sure load is tilted forward to level.
- Place load and relieve all weight from forks.
- Scan area and be sure no pedestrians or obstructions are behind you.
- Once load is settled, slowly back out.
- Do not turn machine until both forks have cleared the pallet.
- Lower forks to a safe traveling height before moving again. Three to five inches is best.
MAINTENANCE
- Do not exceed working capacity.
- After use, please clean and dry the product and store in a dry ventilated place.
Imported to USA:VEVOR STORE INC， 9448 RINCHMOND PL #E
RANCHO CUCAMONGA, California, 91730 United States of America
Imported to AUS:SIHAO PTY LTD，1 ROKEVA STREETEASTWOOD
NSW 2122 Australia
Made In China
Technical Support and E-Warranty Certificate
www.vevor.com/support
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>