LOFTEK SLR0601YC RGB Solar Fence Light User Manual

: June 5, 2024
: LOFTEK

Table of Contents

DAYLIGHT & RGB MODE
CONSTRUCTION
INSTALLATION
Technical Parameters
Product charing and working temperature
Packing list
Warranty and Customer Service
Documents / Resources

RGB Solar Fence Light
USER MANUAL

DAYLIGHT & RGB MODE

LOFTEK upgraded solar fence lights are equipped with 2 lighting modes: Warm white and 7 colors changing RGB. The warm white mode is suitable for daily lighting and
decoration to your pathway, fence, decks, yards, and swimming pool.
Switch it to the RGB mode, 7 different colors will be fade in and out as they change, especially fits for festival décor. With a built-in sensor and automated switch, the light turns on automatically at night or in a dark place and turns off automatically during the day or in a bright place. Absorbing 6-8 hours of sunlight will provide 10-12 hours of lighting at night.

CONSTRUCTION

1. Solar Panel
3. On/OFF Switch
5. Warm White LED Bead| 2. Screw Hole
4. RGB Color Switch
6. RGB Color LED Bead
---|---

INSTALLATION

Step 1: Turn on the Light
Pressing the On/OFF switch at the bottom to turn on the solar light.

Step 2: Install the item under the place where the sunlight exposes directly.

We recommend installing the item at a height of 3 feet on the fence or wall and keeping the solar panel under ideal bright sunlight to make sure it receives at least6-8 hours of direct sunlight to fully charge the battery.

Step 3: Install the light and hang it

Use a tool to drill one hole in the desired location. Gently hammer the pillar hinges into the hole and fasten the screw into the pillar hinges. Then hang the lamp on the screw.

Technical Parameters

Model:	SLR0601YC
Product name：	Solar Fence Light
Size:	4.13.32.1 inch
Material:	Plastic
Ni-MH Battery:	1.2V NI-MH AA600mAh(included)
Solar Panel：	0.35W
LED beads：	2 pc
IP Rating：	IP54

Product charing and working temperature

Charging Temperature：	0℃~+55℃
Working Temperature：	-18℃~+55℃
Charging Time：	6-8 hours
Working Time：	10-12 hours

Packing list

Solar Fence Lamp
Screw
Expansion Pillar-hinge
User Manual

Warm Tips

Before the first use, please make sure the solar light be charged under sunlight for 8-12 hours.
The solar light needs to be placed somewhere which can get direct sunlight regularly.
Solar panel surfaces must be kept clean to absorb sunlight effectively.
The installation location must be far from other light sources, otherwise, it may cause the light not to work.
Please make sure to turn on the switch before use.
In winter or rainy days, insufficient sun absorption will directly affect the brightness and working hours.

Warranty and Customer Service

30-Day Money-Back Guarantee:
6-Month Free Replacement for Product Quality Issue:
Lifetime Customer Support.

Customers’ satisfaction means the world to us! If you encounter any problems, please do not hesitate to contact us at tochsupoor@loftek.us for assistance.

AMZLAB GmbH
Laubenhof 23, 45326 Essen, Germany
THEMIS AR support ltd
85 Great Portland St, London, United Kingdom, W1W 7LT

www.loftek.us