ENVIRO C60 Gas Fireplace User Manual
- June 10, 2024
- Enviro
Table of Contents
ENVIRO C60 Gas Fireplace
Product Information
C Series – 4 Part Surround
The C Series 4 Part Surround comes in four different models – C34, C44,
C60, and C72. The package includes four parts – top, bottom, left, and right,
along with M5 cap screws (8) and M5 nuts (8). The surround is designed to
accommodate up to 1 inch of non-combustible material. The C44 model has
additional installation steps compared to the other models.
Product Usage Instructions
- Using the M5 screw and nuts provided, attach all four pieces as shown in the picture above. Use a 4mm Allen key to tighten the screws. Ensure the notches on the left and right pieces face downward, and the top piece has the slots.
- To aid in the installation of your surround, remove the safety screen by lifting it up off the hooks and pulling the screen assembly out.
- The surround can accommodate up to 1 inch of non-combustible material.
- For C34, C60, and C72 models, insert the notched tabs on the surround into the forward-most slots in the stove (circled above). Use the fasteners on the side of the cabinet to attach the surround.
- Reinstall the safety screen by inserting the four tabs on the back of the screen into the four slots further back in the stove.
- If the surround starts to warp after usage, use self-tapping metal screws (not included) in the slots located on the underside of the top surround piece. Screen removal is required; see steps 2 and 5 for guidance.
PARTS LIST
INSTALLATION
-
Using the M5 screw and nuts provided. Attach all four pieces as shown in the picuture above, use a 4mm allen key to tighten the screws. Make sure the notches on the left and right pieces face downward and the top piece has the slots.
-
To aid in the installation of your surround remove the safety screen by lifting it up off the hooks and pulling the screen assembly out.
-
The surround can accomodate up to 1” of non combustable material.
-
For C34, C60, and C72 models insert the notched tabs on the surround into the forward most slots in the stove (circled above).
Use the fasteners in the side of the cabinet to attach the surround.
-
Reinstall the safety screen by inserting the four tabs on the back of the screen into the four slots further back in the stove.
-
If surround starts to warp after usage, use self-tapping metal screws (not included) in the slots located on the underside of the top surround piece. (screen removal required, see steps 2 and 5)
