SHARP XL-B520D-BK Tokyo Bluetooth Hi-Fi Micro System Owner’s Manual
- June 1, 2024
- Sharp
Table of Contents
SHARP XL-B520D-BK Tokyo Bluetooth Hi-Fi Micro System
Does my device need updated firmware?
To check if your device can benefit from the update, please check the serial
on the main unit or the product box. Only devices described in the section
.”How to check device version number?” require the update. If your serial
number has a different number from those highlighted, you will not need to
apply the update.
What changes are included in the update?
Resolving the problem that prevented certain CD formats from playing.
How to check the device version number?
Locate the product serial number label at the back of your device or on the
product box, it should look like this: If this section in your product serial
number contains the following numbers in characters 13-18, then your device
will benefit from the update:
- For XL-B520D(BK): 600298, 600584, 600668 & 600760.
- For XL-B720D(BK): 600433
If the product serial has a different number in characters 13-18, then your device won’t benefit from the update.
How to prepare a USB flash drive?
- Prepare empty USB flash drive, (capacity= 32GB max, file format= FAT32).
- Download the firmware file from the download section on either of these links: “https://www.sharpconsumer.pl/audio/xlb520dbk/” or “https://www.sharpconsumer.pl/audio/xlb720dbk/”
- Ensure the downloaded file name is “XL-B520D and XL-B720D Softwareupdate”.
- Unzip the file and copy the extracted file to the root directory of your USB flash drive.
Ensure that the USB flash drive has two files in total.
- CDCombo.bin
- Update.mp3
How to upgrade the firmware?
-
If the radio is connected to power, please unplug it first.
-
Make sure that there are only two files on the USB flash drive.
XL-B720D
-
Insert the USB flash drive into the USB port on the back of the radio.
XL-B520D
-
Connect the radio to power by inserting a DC jack on the back of the unit.
-
Press to turn the device on.
-
Change the source to “CD”.
-
If audio starts playing quickly press to stop the playback.
-
Next press and hold the for 5s.
-
The device will start the upgrade process. DO NOT PRESS ANY BUTTON FOR UP TO 1 MINUTE.
-
The upgrade process will end when the radio displays “Reading” on the screen.
-
Remove the DC power plug
-
Remove the USB flash drive.
-
You can now safely once again power your device by inserting the DC power plugs into the power input on the back of the radio.
-
The software upgrade is now complete.
IMPORTANT
Please DO NOT turn off the power or remove the USB flash drive while the unit
is updating.
How to check the firmware version?
- Connect the radio to power.
- Switch on the radio.
- Change mode to USB.
- Press and hold for 2 seconds.
- The radio will display: “CD version: V08”.
Sharp Consumer Electronics Poland sp. z o.o.
Ostaszewo 57B, 87-148 Łysomice, Poland
Made in China
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>