Bega 84215K4 Performance Floodlight User Manual

: June 2, 2024
: BEGA

Table of Contents

Bega 84215K4 Performance Floodlight
Product Information
Product Description
Safety
Installation
Maintenance
Accessories
Spares
Contact
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Bega 84215K4 Performance Floodlight

Bega-84215K4-Performance-Floodlight-product

Product Information

Specifications

Lamp Module Connected Wattage: 18.2 W
Luminaire Connected Wattage: 20.9 W
Colour Temperature: 3000 K or 4000 K
Colour Rendering Index (CRI): > 90
Luminous Flux: 2265 lm to 2300 lm
Luminous Efficiency: 58.6 lm/W to 59.5 lm/W
Rated Temperature: 25°C to 45°C

FAQ

Q: Can I install the product myself?
- A: Installation and commissioning should only be carried out by a qualified electrician to ensure safety and proper operation.
Q: What should I do if I need accessories?
- A: Separate instructions for the use for accessories are available upon request. Contact the manufacturer for more information.

Application

Performance floodlight with G½ mounting bush.
The floodlight can be bolted together with any female thread G½ according to ISO 228 supplied by others or to BEGA accessories.
For a variety of interior and exterior lighting applications.

Product Description

Luminaire made of aluminium alloy, aluminium and stainless steel
BEGA Unidure® coating technology
Colour graphite or silver
Clear safety glass
Silicone gasket
Reflector surface made of pure aluminium
Optical silicone lens · BEGA Hybrid Optics®
Inside louvre made of polyamide
Rotation range of floodlight 350°
Swivel range -30°/+100°
Mounting bracket with G½ threaded connection
Thread length: 11 mm
Connecting cable X05BQ-F 5 G 1 mm²
Cable length 1 m
Complies with flicker requirements in accordance with IEEE 1789, DIN IEC/TR 63158, DIN IEC/TR 61547-1
LED power supply unit
220-240 V 0/50-60 Hz
DC 176-276 V
DALI-controllable
Number of DALI addresses: 1
Basic insulation is provided between the mains and control cables
BEGA Thermal Control®
Temporary thermal regulation to protect temperature-sensitive components without switching off the luminaire
Safety class I
Protection class IP 65
Dust-tight and protection against water jets
Impact strength IK08
Protection against mechanical impacts < 5 joule
– Safety mark
– Conformity mark
Wind catching area: 0.02 m²
Weight: 1.8 kg
This product contains light sources of energy efficiency class(es) E

Safety

The installation and operation of this luminaire are subject to national safety regulations.
Installation and commissioning may only be carried out by a qualified electrician.
The manufacturer accepts no liability for damage caused by improper use or installation.
If subsequent modifications are made to the luminaire, the person responsible for these modifications shall be considered the manufacturer.

Overvoltage protection

The electronic components installed in the luminaire are protected against overvoltage in accordance with DIN EN 61547.
To achieve an additional protection against e. g. transients, etc. we recommend separate overvoltage protection components.

You can find them on our website at www.bega.com.

Lamp

Module connected wattage 18.2 W
Luminaire connected wattage 20.9 W
Rated temperature ta = 25 °C
Ambient temperature ta max = 45 °C

84 215 K4

Module designation LED-0946/940
Colour temperature 4000 K
Colour rendering index CRI > 90
Module luminous flux 2300 lm
Luminaire luminous flux 1244 lm
Luminaire luminous efficiency 59,5 lm / W

84 215 K3

Module designation LED-0946/930
Colour temperature 3000 K
Colour rendering index CRI > 90
Module luminous flux 2265 lm
Luminaire luminous flux 1225 lm
Luminaire luminous efficiency 58,6 lm / W

Lighting technology

Focused light distribution with built-in louvres for stray light reduction.
Half beam angle 8°
For special lighting applications, the symmetrical light cone can be changed to a flat beam using an additional diffuser lens.

Installation

Screw the floodlight G½ threaded connection firmly into the on-site G½ female thread or BEGA accessory.
G½ threaded connection torque = 40 Nm.
Secure the screw connection from loosening on site (if provided with locking screw S, see fig. A).
Check the earth conductor connection between the G½ threaded connection and the on-site G½ female thread.

Adjust floodlight:

Undo hexagon socket screw (wrench size 5 mm) and hexagon nut (wrench size 27 mm) and set the desired beam direction (see sketch B, C).

Torque:

Hexagon socket screw = 7 Nm
Hexagon nut = 35 Nm
Secure bolted connection Gß against loosening by tightening the hexagon socket screws (wrench size 2 mm).

Bega-84215K4-Performance-Floodlight-fig-6

The electrical connection must be carried out with matching protection class and safety class, strain-relieved, with suitable connection terminals (not included in the scope of delivery) at the luminaire power supply cable.

Note correct configuration of the mains supply cable. The earth conductor is connected at the green-yellow ( ), the phase to the brown (L), and the neutral conductor to the blue (N) marked wire. The connection of the control cables is achieved by means of the both leads marked with DALI. In case these leads are not used the luminaire will be operated at full light output.

Maintenance

Cleaning, Maintenance

Clean luminaire regularly with solvent-free cleansers from dirt and deposits.
Do not use high pressure cleaners.

Please note:

Do not remove the desiccant bag from the luminaire housing.
It is needed to remove residual moisture.

Replacing the LED module

The designation of the LED module is noted on a label in the luminaire.
The light colour and light output of BEGA replacement modules correspond to those of the modules originally fitted. The module can be replaced by qualified persons using standard tools.
Disconnect the system.

Open the floodlight:

Undo locking pin (hexagon socket head wrench size 2.5 mm) on the back side of the floodlight housing.
Remove the trim ring along with the safety glass and reflector by twisting it counterclockwise.
Replace LED module.
Please follow the installation instructions for the LED module.
Inspect and, if necessary, replace the luminaire gaskets.
Defective glass must be replaced.
Place trim ring with glass and reflector on the floodlight housing in such a way that the notches in the trim ring and floodlight housing align on top to each other.
Twist on the trim ring clockwise as far as the stop. Tighten locking pin.