GE 22028 Pre-Lit Christmas Trees with Easy Light Instruction Manual

GE 22028 Pre-Lit Christmas Trees with Easy Light

Nicolas Holiday Ltd. thanks you for purchasing this pre-lit Christmas tree. Should you have any problems with your tree, visit us at www.geholidaylighting.com for more information. You can call our toll free number at 1-877-398-7337.
Check our website for latest service hours and assembly instruction videos.

Product Information

The pre-lit Christmas tree eliminates cord connections. It comes with a remote control that allows you to choose from various lighting options, including demo, steady warm white, steady multicolor, slow fade warm white, slow fade multicolor, twinkle warm white, twinkle multicolor, fast flip, slow flip, and slow fade. The tree is 5 feet tall and comes with two sections labeled A and Top, as well as a metal tree stand. No tools are required for assembly. The tree is for indoor use only and operates on 120V. The product is under license by Nicolas Holiday Ltd. and bears the GE trademark of General Electric Company.

Product Usage Instructions

1. Carefully unpack the carton and remove the bubble wrap to inspect the sections of your tree.
2. Insert section A into the tree stand and tighten the thumbscrew. Then, insert the plug into an electrical wall outlet.
3. To assemble the tree top, align and insert the TOP section into the top of section A. Adjust branch tips as needed for a fuller look.
4. Press the foot pedal gently to turn on/off the lights.
5. If the tree does not illuminate, step on the ON/OFF foot pedal and make sure the wall switch is turned on. If one section of your tree does not illuminate, check that section for cut or damaged wires or that all electrical connections on the tree are made.
6. When storing the tree, remove the main extension cord plug from the wall outlet. Starting at the top, disconnect the TOP from section A and gently fold the tips in branches and fold the branches up toward the center. Remove section A from the tree stand and close tree stand to place it into the carton. Refer to the drawing on how to repack your tree. Store the carton neatly in a cool, dry location protected from sunlight to prolong the tree life and to keep the light sets in working order. Do not place a heavy load on the carton to avoid damage to or crushing the carton and tree inside.

Important: Do not use or install any additional Christmas lighting or ornamentation that is powered by a light bulb socket. Doing this may result in damage to your Christmas tree or cause personal injury. Doing this will result in a void of the limited warranty of this product. Disconnect the decorative item from the power source before performing any maintenance or cleaning.

TREE ASSEMBLY DIAGRAM

NOTE: No tools required.

INSTALLATION

1. Carefully unpack the carton. Remove bubble wrap and inspect the sections of your tree. The carton should include sections labeled “A” and “Top”, as well as a Tree Stand.

2. The tree stand should be open and set at 90° angle.

3. Insert Section labeled A into tree stand, tighten the thumbscrew. Then insert the plug into an electrical wall outlet.

4. Untie RED twist-tie to release branch panels. All branches should fall into place with a gentle pull on the outer layer of branches.
   Fig. A. Start at the inner and stagger the tips. Move each tip up to 40°.
   Fig. B. Make tips 2 & 3 to horizontal, tip 4 to vertical and tips 5 and 6 up to 45°.

5. To assemble the tree top, properly align and insert the “TOP” section into the top of section “A”. (See Fig. C) Adjust branch tips, as needed, for a fuller look.

6. Gently press on foot pedal to turn on/off lights.

Tree Storage

1. Remove the tree’s main extension cord plug from the wall outlet.

2. Starting at the top, disconnect the “TOP” from section “A”. {Fig. 1}
   Note: Gently fold the tips in branches and fold the branches up toward the center. {Fig. 2} Care should be taken to avoid damage to the lights.

3. Remove section “A” from the tree stand and close tree stand to place into the carton.

4. Refer to the drawing on how to repack your tree. {Fig. 3}

Troubleshooting Tips

If the tree does not illuminate, try stepping on the ON/OFF foot pedal and make certain the wall switch is turned on. If one section of your tree does not illuminate, check that section for cut or damage wires or that all electrical connections on tree are made. Due to unique construction of the light sets, the individual LEDs are not replaceable. The light sets are designed for continued operation even if an individual LED fails to light.

DISCLAIMER: DO NOT USE OR INSTALL ANY ADDITIONAL CHRISTMAS LIGHTING OR ORNAMENTATION THAT IS POWERED BY A LIGHT BULB SOCKET. DOING THIS MAY RESULT IN DAMAGE TO YOUR CHRISTMAS TREE OR CAUSE PERSONAL INJURY. DOING THIS, WILL RESULT IN A VOID OF THE LIMITED WARRANTY OF THIS PRODUCT.
Disconnect the decorative item from the power source before performing any maintenance or cleaning.

For indoor use only 120V
THIS IS NOT A TOY, FOR DECORATIVE USE ONLY.
GE is a trademark of General Electric Company and is under license by Nicolas Holiday Ltd.

IMPORTANT: Store your carton neatly in a cool, dry location protected from sunlight to prolong the tree life and to better keep the light sets in working order. Do not place a heavy load on the carton to avoid damage to or crushing the carton and tree inside.

©2022 Nicolas Holiday Ltd.
9 F., No. 37, Guangfu North Rd., Taipei, Taiwan 10560 All rights reserved. Printed in China.

References

• The home for holiday lighting

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>