KNIGHT Ergoplan Canteen Table Instruction Manual
- October 30, 2023
- KNIGHT
Table of Contents
KNIGHT Ergoplan Canteen Table Instruction Manual
Thank you for purchasing Knight product, please carefully read the assembly instructions prior to installment to gain a complete understanding of the product. It provides you with important information about the safety, use, installation and maintenance.
WARNING: FAILURE TO COMPLY WITH OR OBSERVE ALL ASSEMBLY, SAFETY AND OPERATION INSTRUCTIONS REGARDING THE USE OF THIS PRODUCT MAY RESULT IN SERIOUS BODILY INJURY.
SAFETY
- The product must be used in a safe manner. Inappropriate use may cause damage to the product and/or cause bodily harm to the user or persons nearby.
- Don’t locate furniture in direct sunlight or near air-conditioning inlet or heating radiator.
- Don’t put high-temperature or frozen objects on furniture.
- Safely carry product to location of assembly.
- Retain this operation manual and pass it on to any future owner.
SET UP AND INSTALLATION
- Assemble the product according to the assembly instructions.
- To prevent possible scratches or damage, assemble the product on a soft surface such as a blanket, carpet or packaging.
- Place the product a safe distance from window frames, radiators, furniture etc. so that persons cannot become trapped.
It is recommended that this product is assembled by 2 people.
Any questions contact Knight on 0800 143 143
Due to continuous improvement of our products, our assembly instructions may not be in complete accordance with the product and we apologise in advance.
Parts
| I tem | Description | Quantity |
|---|---|---|
| A | Top Panel | 1 |
| B | Legs | 2 |
| C | Rails | 3 |
| 1 | M8x25 Screw | 4 |
| 2 | 6mm Allen Key | 1 |
| 3 | 4×40 Screw | 6 |
| 4 | 4×16 Screw | 4 |
**The turning direction of attaching
**
Assembly Instructions
-
M8x25 Screw
-
6mm Allen Key
-
4×40 Screw
-
4×16 Screw
Step 1
Fix legs to rails with screws (1) using the allen key.
Step 2
- Place top panel on level suface. Turn frame over and align on top panel.
- Fix frame to top panel using screws (3) and (4).
- Turn table over to upright position
Complete
