Knight Ergoplan Straight Desk Instruction Manual
- October 30, 2023
- KNIGHT
Table of Contents
Ergoplan Desk 1500/1800
Assembly Instructions
Tools Required: Powered Screwdriver
Thank you for purchasing Knight product, please carefully read the assembly
instructions prior to installment to gain a complete understanding of the
product. It provides you with important information about the safety, use,
installation and maintenance.
WARNING: FAILURE TO COMPLY WITH OR OBSERVE ALL ASSEMBLY, SAFETY AND
OPERATION INSTRUCTIONS REGARDING THE USE OF THIS PRODUCT MAY RESULT IN SERIOUS
BODILY INJURY.
SAFETY
- The product must be used in a safe manner. Inappropriate use may cause damage to the product and/or cause bodily harm to the user or persons nearby.
- Don’t locate furniture in direct sunlight or near air-conditioning inlet or heating radiator.
- Don’t put high-temperature or frozen objects on furniture.
- Safely carry product to location of assembly.
- Retain this operation manual and pass it on to any future owner.
SET UP AND INSTALLATION
- Assemble the product according to the assembly instructions.
- To prevent possible scratches or damage, assemble the product on a soft surface such as a blanket, carpet or packaging.
- Place the product a safe distance from window frames, radiators, furniture etc. so that persons cannot become trapped.
It is recommended that this product is assembled by 2 people.
Any questions contact Knight on 0800 143 143
Due to continuous improvement of our products, our assembly instructions may
not be in complete accordance with the product and we apologise in advance.
Parts
| Item | Description | Quantity |
|---|---|---|
| A | Top Panel | 1 |
| X | Left Side Panel | 1 |
| Z | Right Side Panel | 1 |
| D | Modesty Panel | 1 |
Parts
| Item | Description | Quantity |
|---|---|---|
| c1 | 6×35 Cam Bolt | 10 |
| d1 | 8×30 Dowel Pin | 10 |
| c2 | Cam Sticker | 10 |
| b1 | Bracket | 4 |
| s1 | 3.5×15 Screw | 16 |
Step 1
Preparation for top panel A, left side panel X, right side panel Z and
modesty panel D.
- lnsert cam bolts (c1) into panels A, X and Z.
- Insert dowel pins (d1) into panels X, Z and D.
Step 2
Left side panel X, right side panel Z, and modesty panel D assembly.
- Insert cam bolts (c1) on panels X and Z into cams on panel D and tighten in a clockwise direction.
- Fix panel X & D and panel Z & D with bracket (b1) using screws (s1).
Step 3
Top panel A assembly.
- Insert cam bolts (c1) on panel A into cams on panels Z, D and X and tighten in a clockwise direction.
- Cover top of cams with cam stickers (c2).
- Turn desk over to upright position.
Complete
